John Deere 420C

John Deere 420CThe John Deere 420C is a 2WD agricultural crawler manufactured by John Deere in Dubuque, Iowa, USA from 1956 to 1958. The John Deere 420C is equipped with a 1.9 L (113.0 cu·in) two-cylinder gasoline engine and one of two transmissions: a unsynchronized gear transmission with 4 forward and 1 reverse gears or a unsynchronized gear transmission with 5 forward and 1 reverse gears.

The JD 420C agricultural crawler used the John Deere engine. It is a 1.9 L, 1,851 cm2, (113.0 cu·in) two-cylinder natural aspirated gasoline engine with 108.0 mm (4.25 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 7.2:1.

The John Deere 420C is equipped with mechanical disc clutches steering, mechanical band brakes, an open operator station and 39.7 liters (10.5 US gal.; 8.7 Imp. gal) fuel tank.

John Deere 420C Specifications

General Specifications
ModelJohn Deere 420C
Length2,590 mm (102 in)
Width1,520 mm (59.8 in)
Height (exhaust)1,750 mm (68.9 in)
Wheel base
Ground clearance350 mm (13.8 in)
Weight (shipping) 4-roller: 1,877 kg (4,138 lbs)
5-roller: 2,131 kg (4,698 lbs)
Fuel tank capacity39.7 liters (10.5 US gal.; 8.7 Imp. gal)
Battery6V
Cabin typeOpen operator station
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders2
Fuel typeGasoline
Displacement1.9 L, 1,851 cm2, (113.0 cu·in)
Bore and stroke108.0 mm X 102.0 mm (4.25 in X 4.02 in)
Compression ratio7.2:1
Horsepower
StarterElectric
Oil capacity:4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:10.4 L (11 US. qt, 9.2 Imp. qt.)
Transmission and chassis
ChassisCrawler
Steering typeMechanical disc clutches
BrakesMechanical band
Transmission modelJohn Deere
Transmission typeUnsynchronized gear
Gears4 forward and 1 reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 2.8 kmh (1.7 mph)
Transmission modelJohn Deere
Transmission typeUnsynchronized gear
Gears5 forward and 1 reverse
Speed Forward: 9.3 kmh (5.8 mph) Reverse: 2.8 kmh (1.7 mph)
Tracks
Size10/12/14-inch
Three-Point Hitch
CategoryI (optional)
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed560 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*