The John Deere 4555 is a 2WD or 4WD row-crop tractor from the 4055 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1988 to 1992. The John Deere 4555 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 6 reverse gears or a full power shift transmission with 15 forward and 4 reverse gears.
The JD 4555 row-crop tractor used the John Deere engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 157.2 PS (115.6 kW; 155.0 HP) at 2,200 rpm of PTO output power.
The John Deere 4555 is equipped with power steering, differential hydraulic wet disc brakes, Sound-Gard cab, and 386.0 liters (102 US gal.; 84.9 Imp. gal) fuel tank.
Following attachments are available for the John Deere 4555 row-crop tractor:
- John Deere 280 loader
- John Deere 840 loader
John Deere 4555 Specifications
General Specifications | |
Model | John Deere 4555 |
Length | – |
Width | 2,990 mm (117.7 in) |
Height (Cab) | 3,010 mm (118.5 in) |
Wheel base | 2WD: 3,000 mm (118.1 in) 4WD: 2,970 mm (117.1 in) |
Weight (ballasted) | 9,870 kg (21,760 lbs) |
Fuel tank capacity | 386.0 liters (102 US gal.; 84.9 Imp. gal) |
Battery | Two 12V, CCA 925A |
Cabin type | Sound-Gard cab |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 7.6 L, 7,636 cm2, (466.0 cu·in) |
Bore and stroke | 116.0 mm X 121.0 mm (4.57 in X 4.76 in) |
Compression ratio | 16.0:1 |
Horsepower | 157.2 PS (115.6 kW; 155.0 HP) at 2,200 rpm |
Starter | Electric |
Oil capacity: | 20.8 L (22 US. qt, 18.3 Imp. qt.) |
Coolant capacity: | 30.3 L (32 US. qt, 26.7 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Final drive | Inboard planetary |
Transmission model | John Deere Quad Range |
Transmission type | Partial power shift |
Gears | 16 forward and 6 reverse |
Transmission model | John Deere Power Shift |
Transmission type | Full power shift |
Gears | 15 forward and 4 reverse |
Speed | Forward: 30.1 kmh (18.7 mph) Reverse: 10.1 (6.3 mph) |
Tires | |
Front tires | Ag: – |
Rear tires | Ag: – |
Three-Point Hitch | |
Caterogy | III |
Control type | – |
Lift capacity (at ends) | 2,395 kg (5,280 lbs) With 44 mm lift cylinder: 3,000 kg (6,615 lbs) With 55 mm lift cylinder: 3,200 kg (7,055 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with hydraulic clutch |
Rear PTO speed | 1,000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Pressure | 2530 psi (174.4 bar) |
Valves | 2 or 3 |
Pump flow | 29.5 gpm (111.7 lpm) |
SCV flow | 20.6 gpm (78 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment