The John Deere 4700 is a 4WD compact utility tractor from the 4000 Compact series. This tractor was manufactured by the John Deere in Augusta, Georgia, USA from 2000 to 2003. The John Deere 4700 is equipped with a 2.2 L four-cylinder diesel engine and partially synchronized power shuttle transmission with 12 forward and 12 reverse gears (model with creeper has 24 forward and 24 reverse gears) or hydrostatic transmission with infinite (3-range) forward and reverse gears.
The JD 4700 compact utility tractor used the Yanmar 4TNE88 engine. It is a 2.2 L, 2,196 cm2, (134.0 cu·in) four-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 48.7 PS (35.8 kW; 48.0 HP) at 2,600 rpm of horsepower and 146.4 N·m (14.9 kg·m, 107.9 ft·lb) at 1,700 rpm of torque.
The John Deere 4700 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 47.5 liters (12.5 US gal.; 10.4 Imp. gal) fuel tank.
Following attachments are available for the JD 4700 compact utility tractor:
- Mid-mount John Deere 72 in (1,820 mm) mower deck
- John Deere 460 loader
- John Deere 480 backhoe
John Deere 4700 Specifications
General Specifications | |
Model | John Deere 4700 |
Length | 3,420 mm (134.6 in) |
Width | – |
Height | Fixed ROPS: 2,320 mm (91.6 in) Folding ROPS: 2,470 mm (97.6 in) |
Wheel base | 1815 mm (71.5 in) |
Weight | 1,564 kg (3,448 lbs) |
Fuel tank capacity | 47.5 liters (12.5 US gal.; 10.4 Imp. gal) |
Battery | 12V, CCA 650A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Yanmar 4TNE88 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 2.2 L, 2196 cm2, (134.0 cu·in) |
Bore and stroke | 88.0 mm X 90.0 mm (3.46 in X 3.54 in) |
Compression ratio | 18.0:1 |
Horsepower | 48.7 PS (35.8 kW; 48.0 HP) at 2,600 rpm |
Torque | 146.4 N·m (14.9 kg·m, 107.9 ft·lb) at 1,700 rpm |
Starter | Electric |
Oil type | SAE 15W-40 |
Oil capacity: | 4.8 L (5.1 US. qt, 4.2 Imp. qt.) |
Coolant capacity: | 7.2 L (7.6 US. qt, 6.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | PowrReverser |
Transmission type | Partially synchronized power shuttle |
Gears | 12 forward and 12 reverse |
Speed | Forward: 27.7 kmh (17.2 mph) Reverse: 27.7 (17.2 mph) |
Transmission oil capacity | 25.7 L (6.8 US. gal, 5.7 Imp. gal.) |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (3-range) forward and reverse |
Speed | Forward: 27.8 kmh (17.3 mph) Reverse: 27.8 (17.3 mph) |
Transmission oil capacity | 33.2 L (8.8 US. gal, 7.3 Imp. gal.) |
Transmission model | PowrReverser Creeper |
Transmission type | Partially synchronized power shuttle |
Gears | 24 forward and 24 reverse |
Speed | Forward: 27.7 kmh (17.2 mph) Reverse: 27.7 (17.2 mph) |
Transmission oil capacity | 25.7 L (6.8 US. gal, 5.7 Imp. gal.) |
Tires | |
Front tires | Ag: 8.00-16, 10.00-16.5 |
Rear tires | Ag: 13.6-28, 16.9-24 |
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity (at 610 mm / 24 in) | 1,130 kg (2,492 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Independent |
Middle PTO spped | 2,100 rpm |
Rear PTO type | Independent |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2,500 psi (172.4 bar) |
Valves | 3 (optional) |
Pump flow | 9.9 gpm (37.5 lpm) |
Steering flow | 4.8 gpm (18.2 lpm) |
Total flow | 14.7 gpm (55.6 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment