The John Deere 5045E is a 2WD or 4WD utility tractor from the 5E Series series. This generation has been manufactured by John Deere in Pune, Maharashtra, India from 2015. The John Deere 5045E is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and a partially synchronized with 9 forward and 3 reverse gears.
The John Deere 5045E utility tractor used the John Deere PowerTech 3029T engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.9:1. This engine produced 50.7 PS (37.3 kW; 50 HP) at 2,400 rpm of output power.
The JD 5045E is equipped with power steering, hydraulic wet disc brakes, folding 2-post ROPS, and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank.
Following attachments are available for JD 2025R compact utility tractor:
- John Deere 512 loader
- John Deere H240 MSL loader
- John Deere 520M loader
John Deere 5045E Specifications
General Specifications | |
Model | John Deere 5045E |
Length | 3,500 mm (137.8 in) |
Width | 1,450 mm (57.1 in) |
Height | ROPS: 2,450 mm (96.5 in) |
Wheel base | 2,040 mm (80.3 in) |
Ground clearance | 2WD: 470 mm (18.5 in) 4WD: 340 mm (13.4 in) |
Weight | 2WD: 2,000 kg (4,410 lbs) 4WD: 2,450 kg (5,400 lbs) |
Fuel tank capacity | 68.1 liters (18 US gal.; 15 Imp. gal) |
Battery | 12V, CCA 623A, 80Ah |
Cabin type | Folding 2-post ROPS |
Engine | |
Engine model | John Deere PowerTech 3029T |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
Compression ratio | 16.9:1 |
Horsepower | 50.7 PS (37.3 kW; 50.0 HP) at 2,400 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Hydraulic wet disc |
Transmission model | Top-Shaft Synchronized (TSS) |
Transmission type | Partially synchronized with dry disc clutch |
Gears | 9 forward and 3 reverse |
Speed | Forward: 26.7 kmh (16.6 mph) Reverse: 21.2 kmh (13.2 mph) |
Tires | |
Front tires | Ag: 7.5-16 (2WD), 9.5-24 (4WD) |
Rear tires | Ag: 13.6-28 |
Three-Point Hitch | |
Category | II |
Control type | Position and top-link draft control |
Lift capacity (at ends) | 1,800 kg (3,970 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with mechanical clutch |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 1 or 2 |
Pump flow | 11.4 gpm (43.2 lpm) |
Steering flow | 6.8 gpm (25.7 lpm) |
Total flow | 18.2 gpm (68.9 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment