The John Deere 5045E is a 4WD utility tractor from the 5E Series series. This first generation was manufactured by John Deere in Pune, Maharashtra, India from 2008 to 2014. The John Deere 5045E is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and a partially synchronized transmission with 9 forward and 3 reverse gears.
The John Deere 5045E utility tractor used the John Deere PowerTech 3029T engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 45.7 PS (33.6 kW; 45.1 HP) at 2,400 rpm of output power.
The JD 5045E is equipped with hydrostatic power steering, hydraulic wet disc brakes, folding 2-post ROPS, and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank. This tractor could be equipped with the John Deere 553 NSL loader.
John Deere 5045E Specifications
| General Specifications | |
| Model | John Deere 5045E |
| Length | 3,500 mm (137.8 in) |
| Width | 1,450 mm (57.1 in) |
| Height | ROPS: 2,380 mm (93.7 in) |
| Wheel base | 2,040 mm (80.3 in) |
| Ground clearance | 340 mm (13.4 in) |
| Weight | 2,300 kg (5,071 lbs) |
| Fuel tank capacity | 68.1 liters (18 US gal.; 15 Imp. gal) |
| Battery | 12V, CCA 623A |
| Cabin type | Folding 2-post ROPS |
| Engine | |
| Engine model | John Deere PowerTech 3029T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Horsepower | 45.7 PS (33.6 kW; 45.1 HP) at 2,400 rpm |
| Torque | 184.0 N·m (18.8 kg·m, 135.6 ft·lb) at 1,700 rpm |
| Starter | Electric |
| Oil type | SAE 10W-30, 10W-40 |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Rear diff lock standard |
| Transmission model | SyncShuttle |
| Transmission type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 25.8 kmh (16 mph) Reverse: 20.0 kmh (12.4 mph) |
| Transmission oil capacity | 39.0 L (10.3 US. gal, 8.6 Imp. gal.) |
| Tires | |
| Front tires | Ag: 8.3-24 Lawn/turf: 9.5-16 |
| Rear tires | Ag: 13.6-28, 14.9-28, 16.9-28 Lawn/turf: 21.5L-16.1 |
| Three-Point Hitch | |
| Category | II |
| Control type | Position and top-link draft control |
| Lift capacity (at 610 mm/24 in) | 1,447 kg (3,191 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 39.0 L (10.3 US. gal, 8.6 Imp. gal.) |
| Pressure | 2,828 psi (195 bar) |
| Valves | Rear valves: 1 or 2 Mid valves: 2 |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Total flow | 18.2 gpm (68.9 lpm) |
Be the first to comment