The John Deere 5065E is a 2WD/4WD utility tractor from the 5E series. This second generation was manufactured by John Deere in Pune, Maharashtra, India from 2013 to 2014. The John Deere 5065E is equipped with a 3.0 L (182.6 cu·in) three-cylinder diesel engine and one of two transmissions: the SyncShuttle transmission with 9 forward and 3 reverse gears or the PowrReverser transmission with 12 forward and 12 reverse gears.
The JD 5065E utility tractor used the John Deere PowerTech 3029 engine. It is a 3.0 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,400 rpm of output power.
The John Deere 5065E is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post foldable ROPS or Cab (optional), and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank for ROPS version or 82.1 liters (21.7 US gal, 18.1 Imp. gal) for Cab version. The JD 5065E could be equipped the John Deere 553 NSL loader.
John Deere 5065E Specifications
| General Specifications | |
| Model | John Deere 5065E |
| Length | 3,500 mm (137.8 in) |
| Width | 1,450 mm (57.1 in) |
| Height | ROPS: 2,380 mm (93.7 in) Cab: 1,780 mm (70.1 in) |
| Wheel base | 2,040 mm (80.3 in) |
| Weight | 2WD ROPS: 2,100 kg (4,630 lbs) 4WD ROPS: 2,300 kg (5,071 lbs) |
| Fuel tank capacity | ROPS: 68.1 liters (18.0 US gal.; 15.0 Imp. gal) Cab: 82.1 liters (21.7 US gal, 18.1 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post foldable ROPS or Cab (optional) |
| Engine | |
| Engine model | John Deere PowerTech 3029 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 3.0 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Horsepower | 66 PS (48.5 kW; 65 HP) at 2,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | SyncShuttle |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 28.0 kmh (17.4 mph) Reverse: 21.7 kmh (13.5 mph) |
| Transmission model | PowrReverser |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 31.8 kmh (19.8 mph) |
| Tires | |
| Front tires | Ag: 7.5-16 (2WD), 9.5-24 (4WD) |
| Rear tires | Ag: 16.9-28 |
| Three-Point Hitch | |
| Category | II |
| Control type | Top link draft sensing |
| Lift capacity (at 610 mm/24 in) | 1,447 kg (3,190 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical or electro-hydraulic (optional) clutch |
| Rear PTO speed | 540 or 540/540E rpm (optional) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | Rear: 1 or 2 Mid: 0 or 2 |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Total flow | 18.2 gpm (68.9 lpm) |
Be the first to comment