The John Deere 5075E is a 2WD/4WD utility tractor from the 5E series. This tractor has been manufactured by John Deere in Pune, Maharashtra, India since 2008. The third generation has been manufactured from 2015. The John Deere 5075E is equipped with a 2.9 L three-cylinder diesel engine and Top-Shaft Synchronized transmission with 9 forward and 3 reverse gears or PowrReverser transmission with 12 forward and 12 reverse gears.
The JD 5075E utility tractor used the John Deere PowerTech 3029 engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.8:1. This engine produced 74.0 PS (54.4 kW; 73.0 HP) at 2,100 rpm of maximum output power.
The John Deere 5075E is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post foldable ROPS (the cab was available as an option) and 68.0 liters (18 US gal.; 15 Imp. gal) fuel tank for ROPS version or 82.0 liters (21.7 US gal, 18 Imp. gal) for Cab version.
Following attachments are available for the JD 5075E utility tractor:
- John Deere 512 loader
- John Deere H240 MSL loader
John Deere 5075E Specifications
| General Specifications | |
| Model | John Deere 5075E |
| Length | 3,500 mm (137.8 in) |
| Width | 1,450 mm (57.1 in) |
| Height | ROPS: 2,520 mm (99.5 in) Cab: 2,410 mm (95.0 in) |
| Wheel base | 2,040 mm (80.3 in) |
| Weight | 2WD with ROPS: 2,100 kg (4,630 lbs) 4WD with ROPS: 2,300 kg (5,070 lbs) 4WD with Cab: 2,600 kg (5,730 lbs) |
| Fuel tank capacity | ROPS: 68.0 liters (18 US gal.; 15 Imp. gal) Cab: 82.0 liters (21.7 US gal, 18 Imp. gal) |
| Battery | ROPS: 12V, CCA: 622A, 80Ah Cab: 12V, CCA: 925A, 95Ah |
| Cabin type | Two-post foldable ROPS. Cab optional. |
| Engine | |
| Engine model | John Deere PowerTech 3029 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Compression ratio | 16.9:1 |
| Horsepower | 74.0 PS (54.4 kW; 73.0 HP) at 2,100 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | PowrReverser |
| Transmission type | Partially synchronized power shuttle |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 31.8 kmh (19.8 mph) Reverse: 31.8 (19.8 mph) |
| Transmission model | Top-Shaft Synchronized (TSS) |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 28.0 kmh (17.4 mph) Reverse: 22.1 (13.7 mph) |
| Tires | |
| Front tires | Ag: 7.50-16 (2WD), 9.5-24 (4WD) |
| Rear tires | Ag: 16.9-28 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | Position and top-link draft control |
| Lift capacity (at ends) | 1,800 kg (3,970 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 or 2 |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Total flow | 18.2 gpm (68.9 lpm) |
I’m looking for the transmission fluid capacity for 2019 john deere 5075e 4wd with cab & 520m loader.