The John Deere 5085E is a 4WD utility tractor from the 5E series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2013 to 2017. This second generation was manufactured from 2015 to 2017. The John Deere 5085E is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with 12 forward and 12 reverse gears or a partially synchronized transmission with 24 forward and 12 reverse gears.
The John Deere 5085E utility tractor used the John Deere FJDXL04.5305 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm of output power.
The JD 5085E is equipped with power steering, hydraulic wet disc brakes, two-post foldable ROPS or Cab (optional), and 113.6 liters (30 US gal.; 25 Imp. gal) fuel tank.
John Deere 5085E Specifications
General Specifications | |
Model | John Deere 5085E |
Length | – |
Width | – |
Height | – |
Wheel base | 2,340 mm (92.1 in) |
Ground clearance (front axle) | 380 mm (15 in) |
Weight (shipping) | ROPS: 3,300 kg (7,275 lbs) Cab: 3,700 kg (8,157 lbs) |
Fuel tank capacity | 113.6 liters (30 US gal.; 25 Imp. gal) |
Battery | 12V |
Cabin type | Two-post foldable ROPS or Cab (optional) |
Engine | |
Engine model | John Deere FJDXL04.5305 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
Horsepower | 86.2 PS (63.4 kW; 85.0 HP) at 2,500 rpm |
Starter | Electric |
Oil type | SAE 10W-30, 10W-40 |
Oil capacity: | 12.1 L (12.8 US. qt, 10.6 Imp. qt.) |
Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Hydraulic wet disc |
Final drive | Inboard planetary |
Differential lock | Mechanical rear |
Transmission model | PowrReverser |
Transmission type | Partially synchronized |
Gears | 12 forward and 12 reverse |
Speed | Forward: 37.4 kmh (23.2 mph) |
Transmission oil capacity | 43.5 L (11.5 US. gal, 9.6 Imp. gal.) |
Transmission model | PowrReverser Plus |
Transmission type | Partially synchronized |
Gears | 24 forward and 12 reverse |
Speed | Forward: 40.9 kmh (25.4 mph) Reverse: kmh (0 mph) |
Transmission oil capacity | 43.5 L (11.5 US. gal, 9.6 Imp. gal.) |
Tires | |
Front tires | Ag: 11.2-24 |
Rear tires | Ag: 16.9-30 |
Three-Point Hitch | |
Category | II |
Control type | Mechanical top-link draft sensing |
Lift capacity (at 610 mm/24 in) | 1,460 kg (3,215 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with electro-hydraulic clutch |
Rear PTO speed | 540/540E, 540/1000 (optional) rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 43.5 L (11.5 US. gal, 9.6 Imp. gal.) |
Pressure | 2900 psi (199.9 bar) |
Valves | 2 or 3 |
SCV flow | 15.9 gpm (60.2 lpm) |
Total flow | 22.5 gpm (85.2 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment