The John Deere 5101E is a 4WD utility tractor from the 5E Limited series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2008 to 2012. The John Deere 5101E is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and a partially synchronized with wet disc clutch transmission with 12 forward and 12 reverse gears.
The JD 5101E utility tractor used the John Deere PowerTech 4045 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.6:1. This engine produced 102.4 PS (75.3 kW; 101.0 HP) at 2,400 rpm of output power.
The John Deere 5101E is equipped with hydrostatic power steering, independent hydraulic wet disc brakes, cab (standard) with heat and air-conditioning and 126.8 liters (33.5 US gal.; 27.9 Imp. gal) fuel tank.
Following attachments are available for the John Deere 5101E utility tractor:
- John Deere 553 loader
- John Deere 563 loader
- John Deere H260 loader
John Deere 5101E Specifications
| General Specifications | |
| Model | John Deere 5101E |
| Length | 3,740 mm (147.2 in) |
| Width | 1,640 mm (64.6 in) |
| Height (cab) | 2,500 mm (98.4 in) |
| Wheel base | 2,170 mm (85.4 in) |
| Ground clearance (front axle) | 410 mm (16.1 in) |
| Weight (operating) | 3,320 kg (7,319 lbs) |
| Fuel tank capacity | 126.8 liters (33.5 US gal.; 27.9 Imp. gal) |
| Battery | 12V, CCA 950A |
| Cabin type | Cab (standard) with heat and air-conditioning |
| Engine | |
| Engine model | John Deere PowerTech 4045 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Compression ratio | 17.6:1 |
| Horsepower | 102.4 PS (75.3 kW; 101.0 HP) at 2,400 rpm |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Independent hydraulic wet disc |
| Final drive | Planetary |
| Differential lock | Rear standard |
| Transmission model | PowrReverser |
| Transmission type | Partially synchronized with wet disc clutch |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 36.0 kmh (22.4 mph) Reverse: 39.2 kmh (24.4 mph) |
| Transmission oil capacity | 43.5 L (11.5 US. gal, 9.6 Imp. gal.) |
| Tires | |
| Front tires | Ag: 12.4-24 |
| Rear tires | Ag: 18.4-30 |
| Three-Point Hitch | |
| Category | II/I |
| Control type | Position control and top-link draft sensing |
| Lift capacity (at 610 mm /24 in) | 1,460 kg (3,220 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical clutch |
| Rear PTO speed | 540/540E or 540/1000 (optional) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2828 psi (195 bar) |
| Valves | Rear: 1 to 3 Middle: 2 |
| Pump flow | 15.9 gpm (60.2 lpm) |
| Steering flow | 6.6 gpm (25 lpm) |
| Total flow | 22.5 gpm (85.2 lpm) |
Be the first to comment