The John Deere 5310 is a 2WD or 4WD utility tractor from the 5000 Ten series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 1998 to 2001. The John Deere 5310 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of three transmissions: an unsynchronized gear transmission with 9 forward and 3 reverse gears, a partially synchronized transmission with 9 forward and 3 reverse gears or a power shuttle transmission with 12 forward and 12 reverse gears.
The JD 5310 utility tractor used the John Deere 3029T engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 64.9 PS (47.7 kW; 64.0 HP) at 2,400 rpm of output power and 195.0 N·m (19.9 kg·m, 143.7 ft·lb) at 1,400 rpm of torque.
The John Deere 5310 is equipped with power steering, hydraulic wet disc brakes, two-post ROPS or cab (optional), and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank for ROPS version or 87.1 liters (23 US gal, 19.2 Imp. gal) for the cab version.
Following attachments are available for the JD 5310 utility tractor:
- John Deere 521 loader
- John Deere 541 loader
- John Deere 541 Self-Leveling loader
- John Deere 49 backhoe
John Deere 5310 Specifications
| General Specifications | |
| Model | John Deere 5310 |
| Length | 2WD: 3,130 mm (123.2 in) 4WD: 3,250 mm (128 in) |
| Width | 1,690 mm (66.5 in) |
| Height | ROPS: 2,250 mm (88.6 in) Cab: 2,480 mm (97.6 in) |
| Wheelbase | 2,040 mm (80.3 in) |
| Ground clearance | 2WD: 450 mm (17.7 in) 4WD: 370 mm (14.6 in) |
| Weight (shipping) | 2WD ROPS: 1,975 kg (4,355 lbs) 2WD Cab: 2,425 kg (5,345 lbs) 4WD ROPS: 2,155 kg (4,750 lbs) 4WD Cab: 2,610 kg (5,750 lbs) |
| Fuel tank capacity | ROPS: 68.1 liters (18 US gal.; 15 Imp. gal) Cab: 87.1 liters (23 US gal, 19.2 Imp. gal) |
| Battery | 12V, CCA 700A |
| Cabin type | Two-post ROPS or Cab (optional) |
| Engine | |
| Engine model | John Deere 3029T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Compression ratio | 17.8:1 |
| Horsepower | 64.9 PS (47.7 kW; 64.0 HP) at 2,400 rpm |
| Torque | 195.0 N·m (19.9 kg·m, 143.7 ft·lb) at 1,400 rpm |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Transmission model | CollarShift |
| Transmission type | Unsynchronized gear with dry disc clutch |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 26.0 kmh (16.2 mph) Reverse: 22.2 (13.8 mph) |
| Transmission oil capacity | 37.9 L (10 US. gal, 8.3 Imp. gal.) |
| Transmission model | SyncShuttle |
| Transmission type | Partially synchronized with dry disc clutch |
| Gears | 9 forward and 3 reverse |
| Speed | Forward: 26.0 kmh (16.2 mph) Reverse: 22.2 (13.8 mph) |
| Transmission oil capacity | 37.9 L (10 US. gal, 8.3 Imp. gal.) |
| Transmission model | PowrReverser |
| Transmission type | Power shuttle with wet disc clutch |
| Gears | 12 forward and 12 reverse |
| Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 29.9 (18.6 mph) |
| Transmission oil capacity | 43.5 L (11.5 US. gal, 9.6 Imp. gal.) |
| Tires | |
| Front tires | Ag: 7.50-16 (2WD), 9.5-24 (4WD) |
| Rear tires | Ag: 14.9-28 |
| Three-Point Hitch | |
| Category | II/I |
| Control type | – |
| Lift capacity (at 610 mm/24 in) | 1,530 kg (3,375 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 or 540/540E (SyncShuttle) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 2855 L (754.2 US. gal, 628 Imp. gal.) |
| Valves | 5 |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Total flow | 18.2 gpm (68.9 lpm) |
Be the first to comment