The John Deere 6030 is a 2WD row-crop tractor from the Generation II series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1972 to 1977. The John Deere 6030 is equipped with an 8.7 L six-cylinder diesel engine and partially synchronized transmission with dry disc clutch and 8 forward and 2 reverse gears.
The John Deere 6030 row-crop tractor used the John Deere engine. It is a 8.7 L, 8,702 cm2, (531.0 cu·in) six-cylinder diesel engine with 121.0 mm (4.76 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 177.5 PS (130.5 kW; 175.0 HP) at 2,100 rpm of PTO output power.
During the 1973 model year, the John Deere 6030 offered with an 8.7 L (531.0 cu·in) naturally-aspirated six-cylinder diesel engine. This engine produced 142.9 PS (105.1 KW; 140.9 HP) at 2,100 rpm of PTO horsepower.
The John Deere 6030 is equipped with power steering, differential hydraulic wet disc brakes, open operator station (cab with air-conditioning was available as an option) and 276.3 liters (73 US gal.; 60.8 Imp. gal) fuel tank.
John Deere 6030 Specifications
General Specifications | |
Model | John Deere 6030 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,640 mm (103.9 in) |
Weight | 8,246 kg (18,179 lbs) |
Fuel tank capacity | 276.3 liters (73 US gal.; 60.8 Imp. gal) |
Battery | 6V x 2 |
Cabin type | Open operator station. Cab with air-conditioning (optional). |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 8.7 L, 8,702 cm2, (531.0 cu·in) |
Bore and stroke | 121.0 mm X 127.0 mm (4.76 in X 5 in) |
Compression ratio | 15.4:1 |
Horsepower | 177.5 PS (130.5 kW; 175.0 HP) at 2,100 rpm |
Starter | Electric |
Coolant capacity: | 37.9 L (40 US. qt, 33.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Differential lock | Hydraulic-actuated |
Transmission model | John Deere Syncro-Range |
Transmission type | Partially synchronized with dry disc clutch |
Gears | 8 forward and 2 reverse |
Speed | Forward: 30.9 kmh (19.2 mph) Reverse: 12.2 (7.6 mph) |
Tires | |
Front tires | Ag: 9.50-20 |
Rear tires | Ag: 20.8-38 |
Three-Point Hitch | |
Caterogy | III/II |
Control type | – |
Lift capacity (at ends) | 2,680 kg (5,909 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO spped | 1,000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Hydraulic capacity | 60.6 L (64.04 US. qt, 53.32 Imp. qt.) |
Valves | 2 |
Pump flow | 22.0 gpm (83.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment