The John Deere 6105D is a 2WD/4WD utility tractor from the 6D series. This tractor was manufactured by John Deere in Saltillo, Mexico from 2013 to 2016. The John Deere 6105D is equipped with a 4.5 L (275.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 9 forward and 9 reverse gears, a partially synchronized transmission with 12 forward and 12 reverse gears or a partially synchronized transmission with 24 forward and 12 reverse gears.
The JD 6105D utility tractor used the John Deere PowerTech PWX engine. It is a 4.5 L, 4,506 cm2, (275.0 cu·in) four-cylinder wastegate turbocharged intercooled diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm of output power and 423.1 N·m (43.1 kg·m, 311.8 ft·lb) at 1,600 rpm of torque.
The John Deere 6105D is equipped with power steering, hydraulic wet disc brakes, two-post foldable ROPS or Cab (optional) and 157.8 liters (41.7 US gal.; 34.7 Imp. gal) fuel tank.
Following attachments are available for the John Deere 6105D utility tractor:
- John Deere H260 loader
- John Deere H310 loader
John Deere 6105D Specifications
| General Specifications | |
| Model | John Deere 6105D |
| Length | 2WD: 4,270 mm (168.1 in) 4WD: 4,210 mm (165.7 in) |
| Width | 2,450 mm (96.5 in) |
| Height (cab) | 2,740 mm (107.9 in) |
| Wheelbase | 2,450 mm (96.5 in) |
| Ground clearance (front axle) | 2WD: 590 mm (23.2 in) 4WD: 450 mm (17.7 in) |
| Weight (shipping) | 2WD ROPS: 3,590 kg (7,915 lbs) 4WD ROPS: 4,150 kg (9,149 lbs) |
| Fuel tank capacity | 157.8 liters (41.7 US gal.; 34.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post foldable ROPS or Cab (optional) |
| Engine | |
| Engine model | John Deere PowerTech PWX |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,506 cm2, (275.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Compression ratio | 19.0:1 |
| Horsepower | 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm |
| Torque | 423.1 N·m (43.1 kg·m, 311.8 ft·lb) at 1,600 rpm |
| Starter | Electric |
| Oil capacity: | 15.0 L (15.9 US. qt, 13.2 Imp. qt.) |
| Coolant capacity: | 17.7 L (18.7 US. qt, 15.6 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Differential lock | Mechanical rear |
| Transmission model | Top Shaft Synchronized PowrReverser |
| Transmission type | Partially synchronized with wet disc clutch |
| Gears | 9 forward and 9 reverse |
| Speed | Forward: 28.3 kmh (17.6 mph) Reverse: 29.3 kmh (18.2 mph) |
| Transmission model | 12-Speed PowrReverser |
| Transmission type | Partially synchronized with wet disc clutch |
| Gears | 12 forward and 12 reverse |
| Transmission model | Hi-Lo PowrReverser |
| Transmission type | Partially synchronized with wet disc clutch |
| Gears | 24 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 10.00-16 (2WD), 18.4-34 (4WD) |
| Rear tires | Ag: 13.6-24 (2WD), 18.4-34 (4WD) |
| Three-Point Hitch | |
| Category | II |
| Control type | Position control, draft-control (optional) |
| Lift capacity) | 2,495 kg (5,500 lbs) Optional: 3,310 kg (7,300 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2828 psi (195 bar) |
| Valves | 2 or 3 |
| Pump flow | 20.0 gpm (75.7 lpm) |
| SCV flow | 20.0 gpm (75.7 lpm) |
Be the first to comment