The John Deere 6210 is a 2WD utility tractor from the 6000 TEN series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1999 to 2002. The JD 6210 is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of four transmission variants.
The JD 6210 utility tractor used the John Deere 4045TL054 engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.8:1. This engine produced 91.3 PS (67.1 kW; 90 HP) at 2,300 rpm of output power.
The John Deere 6210 is equipped with power steering, differential hydraulic wet disc brakes, two-post ROPS or ComfortGard cab (optional) and 116.2 liters (30.7 US gal.; 25.6 Imp. gal) fuel tank.
Following attachments are available for the John Deere 6210 utility tractor:
- John Deere 620 loader
- John Deere 640 loader
- John Deere 640SL loader
John Deere 6210 Specifications
General Specifications | |
Model | John Deere 6210 |
Length | 4,130 mm (162.6 in) |
Width | 2,030 mm (79.9 in) |
Height | ROPS: 2,730 mm (107.5 in) Cab: 2,580 mm (101.6 in) |
Wheel base | 2,400 mm (94.5 in) |
Ground clearance | 2WD: 580 mm (22.8 in) 4WD: 460 mm (18.1 in) |
Weight (shipping) | 2WD ROPS: 3,365 kg (7,419 lbs) 2WD Cab: 3,595 kg (7,926 lbs) 4WD ROPS: 3,590 kg (7,916 lbs) 4WD Cab: 3,820 kg (8,423 lbs) |
Fuel tank capacity | 116.2 liters (30.7 US gal.; 25.6 Imp. gal) 165.0 liters (43.6 US gal, 36.3 Imp. gal) |
Battery | 12V, CCA 830A |
Cabin type | Two-post ROPS or ComfortGard cab (optional) |
Engine | |
Engine model | John Deere 4045TL054 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
Compression ratio | 17.8:1 |
Horsepower | 91.3 PS (67.1 kW; 90 HP) at 2,300 rpm |
Torque | 371.5 N·m (37.9 kg·m, 273.8 ft·lb) at 1,900 rpm |
Starter | Electric |
Oil capacity: | 12.0 L (12.7 US. qt, 10.6 Imp. qt.) |
Coolant capacity: | ROPS: 11.0 L (11.6 US. qt, 9.7 Imp. qt.) Cab: 13.5 L (14.3 US.qt, 11.9 Imp. qts) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Differential hydraulic wet disc |
Transmission model | SyncroPlus |
Transmission type | Fully synchronized with wet disc clutch |
Gears | 12 forward and 4 reverse |
Speed | Forward: 29.8 kmh (18.5 mph) Reverse: 20.3 kmh (12.6 mph) |
Transmission model | SyncroPlus Power Reverser |
Transmission type | Four-speed power shift with wet disc clutch |
Gears | 16 forward and 16 reverse |
Speed | Forward: 29.8 kmh (18.5 mph) |
Transmission model | PowrQuad |
Transmission type | Four-speed power shift with hydraulic wet disc clutch |
Gears | 16 forward and 16 reverse |
Speed | Forward: 29.8 kmh (18.5 mph) |
Transmission model | PowrQuad |
Transmission type | Four-speed power shift with hydraulic wet disc clutch |
Gears | 24 forward and 24 reverse |
Speed | Forward: 29.8 kmh (18.5 mph) |
Tires | |
Front tires | Ag: 7.50-18 (2WD), 12.4-24 (4WD) |
Rear tires | Ag: 16.9-30 |
Three-Point Hitch | |
Category | II |
Control type | Electronic lower-link draft sensing |
Lift capacity (at ends) | 2,150 kg (4,740 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 or 540/1000 (optional) rpm |
Hydraulic system | |
Hydraulic type | Closed center pressure-flow compensating |
Pressure | 2900 psi (199.9 bar) |
Valves | 1 to 4 |
Pump flow | 25.4 gpm (96.1 lpm) 18.9 gpm (71.5 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment