The John Deere 8760 is a 4WD four-wheel drive tractor from the 8060 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1989 to 1993. The JD 8760 is equipped with a 10.1 L (619.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 12 forward and 3 reverse gears, a partial power shift transmission with 24 forward and 6 reverse gears or a full powershift transmission with 12 forward and 2 reverse gears.
The John Deere 8760 four-wheel drive tractor used the John Deere engine. It is a 10.1 L, 10,140 cm2, (619.0 cu·in) six-cylinder turbocharged diesel engine with 130.0 mm (5.12 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 304.2 PS (223.7 kW; 300.0 HP) at 2,100 rpm of output power.
The John Deere 8760 is equipped with articulated power steering, Sound-Gard cab, and 832.7 liters (220 US gal.; 183.2 Imp. gal) fuel tank.
John Deere 8760 Specifications
General Specifications | |
Model | John Deere 8760 |
Length | 6,830 mm (268.9 in) |
Width | – |
Height | – |
Wheel base | 3,400 mm (133.9 in) |
Weight | 14,560 kg (32,100 lbs) |
Fuel tank capacity | 832.7 liters (220 US gal.; 183.2 Imp. gal) |
Battery | Two 12V, CCA 925A |
Cabin type | Sound-Gard cab |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 10.1 L, 10,140 cm2, (619.0 cu·in) |
Bore and stroke | 130.0 mm X 127.0 mm (5.12 in X 5 in) |
Horsepower | 304.2 PS (223.7 kW; 300.0 HP) at 2,100 rpm |
Starter | Electric |
Coolant capacity: | 55.0 L (58.1 US. qt, 48.4 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 articulated 4WD |
Steering type | Articulated power |
Brakes | – |
Transmission model | John Deere Syncro |
Transmission type | Partially synchronized with hydraulic wet disc clutch |
Gears | 12 forward and 3 reverse |
Transmission model | John Deere PowrSync |
Transmission type | Partial power shift with hydraulic wet disc clutch |
Gears | 24 forward and 6 reverse |
Transmission model | John Deere Power Shift |
Transmission type | Full power shift with hydraulic wet disc clutch |
Gears | 12 forward and 2 reverse |
Speed | Forward: 32.6 kmh (20.3 mph) Reverse: 9.8 (6.1 mph) |
Tires | |
Front tires | Ag: 20.8R-38 |
Rear tires | Ag: 20.8R-38 |
Three-Point Hitch | |
Caterogy | III |
Control type | – |
Lift capacity (at ends) | 6,795 kg (14,985 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 1,000 rpm |
Hydraulic system | |
Hydraulic type | Closed-center pressure compensated |
Hydraulic capacity | 177.9 L (187.99 US. qt, 156.53 Imp. qt.) |
Valves | 3 |
Pump flow | 44.8 gpm (169.6 lpm) |
SCV flow | 33.3 gpm (126.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment