The John Deere 8770 is a 4WD four-wheel drive from the 8070 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1993 to 1996. The John Deere 8770 is equipped with a 10.1 L (619.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 12 forward and 3 reverse gears, a two-speed power shift transmission with 24 forward and 6 reverse gears or a full power shift transmission with 12 forward and 2 reverse gears.
The JD 8770 four-wheel drive used the John Deere engine. It is a 10.1 L, 10,144 cm2, (619.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 130.0 mm (5.12 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.75:1. This engine produced 304.2 PS (223.7 kW; 300.0 HP) at 2,100 rpm of output power.
The John Deere 8770 is equipped with hydrostatic power steering, hydraulic wet discs brakes, Sound-Gard cab (standard) and 832.7 liters (220 US gal.; 183.2 Imp. gal) fuel tank.
John Deere 8770 Specifications
General Specifications | |
Model | John Deere 8770 |
Length | 6,830 mm (268.9 in) |
Width | – |
Height | – |
Wheel base | 3,400 mm (133.9 in) |
Weight | 14,950 kg (32,959 lbs) |
Fuel tank capacity | 832.7 liters (220 US gal.; 183.2 Imp. gal) |
Battery | Two 12V, CCA 925A |
Cabin type | Sound-Gard cab (standard) |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 10.1 L, 10,144 cm2, (619.0 cu·in) |
Bore and stroke | 130.0 mm X 127.0 mm (5.12 in X 5 in) |
Compression ratio | 15.75:1 |
Horsepower | 304.2 PS (223.7 kW; 300.0 HP) at 2,100 rpm |
Starter | Electric |
Oil capacity: | 32.0 L (33.8 US. qt, 28.2 Imp. qt.) |
Coolant capacity: | 54.9 L (58 US. qt, 48.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 articulated 4WD |
Steering type | Hydrostatic power |
Brakes | Hydraulic wet discs |
Final drive | Inboard planetary |
Transmission model | Syncro |
Transmission type | Partially synchronized with hydraulic wet disc clutch |
Gears | 12 forward and 3 reverse |
Transmission model | PowrSync |
Transmission type | Two-speed power shift with hydraulic wet disc clutch |
Gears | 24 forward and 6 reverse |
Transmission model | Power Shift |
Transmission type | Full power shift with hydraulic wet disc clutch |
Gears | 12 forward and 2 reverse |
Tires | |
Front tires | Ag: 24.5R-32, 18.4R-38, 20.8R-38, 710/70R38, 18.4R-42, 20.8R-42,18.4R-46 |
Rear tires | Ag: 24.5R-32, 18.4R-38, 20.8R-38, 710/70R38, 18.4R-42, 20.8R-42,18.4R-46 |
Three-Point Hitch | |
Category | III (optional) |
Control type | Draft sensing |
Lift capacity | 6,795 kg (14,980 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with hydraulic wet disc clutch |
Rear PTO speed | 1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center pressure compensated |
Hydraulic capacity | 143.8 L (38 US. gal, 31.6 Imp. gal.) |
Pressure | 2530 psi (174.4 bar) |
Valves | Rear: 3 to 5 |
Pump flow | 44.8 gpm (169.6 lpm) |
SCV flow | 33.3 gpm (126.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment