The John Deere 9200 is a 4WD four-wheel drive tractor from the 9000 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1996 to 2001.
The John Deere 9200 is equipped with one of two engines: a 10.5 L (643.0 cu·in) six-cylinder diesel engine or a 12.5 L (765.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 12 forward and 3 reverse gears, a partial power shift transmission with 24 forward and 6 reverse gears or a full power shift transmission with 12 forward and 2 reverse gears.
The tractor could be equipped with the following engines:
- John Deere (1996-2000). It is a 10.5 L, 10,534 cm2, (643.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 127.0 mm (5.0 in) of the cylinder bore and 138.0 mm (5.43 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 314.4 PS (231.2 kW; 310.0 HP) at 2,100 rpm of output power.
- John Deere (During 2001). It is a 12.5 L, 12,536 cm2, (765.0 cu·in) six-cylinder turbocharged aftercooled diesel engine. The cylinder bore is 127.0 mm (5.0 in) and the piston stroke is 165.0 mm (6.5 in). The compression ratio rating is 16.0:1. This engine produced 314.4 PS (231.2 kW; 310.0 HP) at 2,100 rpm of output power.
The JD 9200 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab (standard) and 1022.0 liters (270 US gal.; 224.8 Imp. gal) fuel tank.
John Deere 9200 Specifications
General Specifications | |
Model | John Deere 9200 |
Length | 6,950 mm (273.6 in) |
Width (duals) | 4,010 mm (157.9 in) |
Height (cab) | 3,490 mm (137.4 in) |
Wheel base | 3,500 mm (137.8 in) |
Ground clearance (axles) | 730 mm (28.7 in) |
Weight (shipping) | 14,070 kg (31,019 lbs) |
Fuel tank capacity | 1022.0 liters (270 US gal.; 224.8 Imp. gal) |
Battery | Three 12V, CCA 925A |
Cabin type | Cab (standard) |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 10.5 L, 10,534 cm2, (643.0 cu·in) |
Bore and stroke | 127.0 mm X 138.0 mm (5.00 in X 5.43 in) |
Compression ratio | 16.0:1 |
Horsepower | 314.4 PS (231.2 kW; 310.0 HP) at 2,100 rpm |
Starter | Electric |
Oil capacity: | 41.6 L (44 US. qt, 36.6 Imp. qt.) |
Coolant capacity: | 53.0 L (56 US. qt, 46.6 Imp. qt.) |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 12.5 L, 12,536 cm2, (765.0 cu·in) |
Bore and stroke | 127.0 mm X 165.0 mm (5.00 in X 6.5 in) |
Compression ratio | 16.0:1 |
Horsepower | 314.4 PS (231.2 kW; 310.0 HP) at 2,100 rpm |
Starter | Electric |
Oil capacity: | 41.6 L (44 US. qt, 36.6 Imp. qt.) |
Coolant capacity: | 60.6 L (64 US. qt, 53.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 articulated 4WD |
Steering type | Hydrostatic power |
Brakes | Hydraulic wet disc |
Transmission model | John Deere Syncro |
Transmission type | Partially synchronized |
Gears | 12 forward and 3 reverse |
Speed | Forward: 30.6 kmh (19.0 mph) Reverse: 9.8 kmh (6.1 mph) |
Transmission oil capacity | 129.0 L (34.1 US. gal, 28.4 Imp. gal.) With PTO: 131.0 L (34.6 US. gal, 28.8 Imp. gal.) |
Transmission model | John Deere PowrSync |
Transmission type | Partial power shift |
Gears | 24 forward and 6 reverse |
Speed | Forward: 36.5 kmh (22.7 mph) Reverse: 11.7 kmh (7.3 mph) |
Transmission oil capacity | 129.0 L (34.1 US. gal, 28.4 Imp. gal.) With PTO: 131.0 L (34.6 US. gal, 28.8 Imp. gal.) |
Transmission model | John Deere PowerShift |
Transmission type | Full power shift |
Gears | 12 forward and 2 reverse |
Speed | Forward: 29.8 kmh (18.5 mph) Reverse: 9.0 kmh (5.6 mph) |
Transmission oil capacity | 53.0 L (14 US. gal, 11.7 Imp. gal.) |
Tires | |
Front tires | Ag: 20.8R42 |
Rear tires | Ag: 20.8R42 |
Three-Point Hitch | |
Category | III |
Control type | – |
Lift capacity | 6,290 kg (13,870 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 1000 (optional) |
Hydraulic system | |
Hydraulic type | Closed center PFC |
Hydraulic capacity | 98.4 L (26 US. gal, 21.6 Imp. gal.) |
Pressure | 2900 psi (199.9 bar) |
Valves | 3 to 5 |
Pump flow | 35.0 gpm (132.5 lpm) |
Total flow | 44.0 gpm (166.6 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment