John Deere 9620R

John Deere 9620RThe John Deere 9620R is a 4WD four-wheel drive from the 9R series. This tractor has been manufactured by John Deere in Waterloo, Iowa, USA from 2015. The John Deere 9620R is equipped with a 14.9 L (912.0 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 6 reverse gears.

The JD 9620R four-wheel drive used the Cummins QSX15 engine. It is a 14.9 L, 14,945 cm2, (912.0 cu·in) six-cylinder diesel engine with 137.0 mm (5.39 in) of the cylinder bore and 169.0 mm (6.65 in) of the piston stroke. This engine produced 628.7 PS (462.3 kW; 620.0 HP) at 2,100 rpm of output power.

The John Deere 9620R is equipped with articulated power steering, hydraulic wet disc brakes, Command View Cab III (standard) and 1514.0 liters (400 US gal.; 333 Imp. gal) fuel tank.

John Deere 9620R Specifications

General Specifications
ModelJohn Deere 9620R
Length8,110 mm (319.3 in)
Width4,900 mm (192.9 in)
Height (cab)3,680 mm (144.9 in)
Wheel base
Ground clearance (drawbar)380 mm (15 in)
Weight (shipping)19,754 kg (43,550 lbs)
Fuel tank capacity1514.0 liters (400 US gal.; 333 Imp. gal)
BatteryFour 12V, CCA 925A
Cabin typeCommand View Cab III (standard)
Engine
Engine modelCummins QSX15
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement14.9 L, 14,945 cm2, (912.0 cu·in)
Bore and stroke137.0 mm X 169.0 mm (5.39 in X 6.65 in)
Horsepower628.7 PS (462.3 kW; 620.0 HP) at 2,100 rpm
StarterElectric
Oil capacity:43.5 L (46 US. qt, 38.3 Imp. qt.)
Coolant capacity:83.0 L (87.7 US. qt, 73 Imp. qt.)
Transmission and chassis
Chassis4×4 articulated 4WD
Steering typeArticulated power
BrakesHydraulic wet disc
Differential lockElectro-hydraulic front and rear
Transmission modele18 PowerShift
Transmission typeFull power shift
Gears18 forward and 6 reverse
Speed Forward: 40.2 kmh (25 mph) Reverse: 12.8 kmh (8 mph)
Transmission oil capacity220.0 L (58.1 US. gal, 48.4 Imp. gal.)
Tires
Front tiresAg: –
Rear tiresAg: –
Three-Point Hitch
CategoryIV/IVN
Control typeDraft sensing
Lift capacity6,805 kg (15,000 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with electro-hydraulic clutch
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeClosed-center pressure/flow compensated
Hydraulic capacity 220.0 L (58.1 US. gal, 48.4 Imp. gal.)
227.0 L (60.0 US gal, 50.0 Imp. gal)
Pressure2900 psi (199.9 bar)
Valves Rear: 4 to 8
Pump flow 58.0 gpm (219.6 lpm)
115.0 gpm (435.3 lpm)
SCV flow 35.0 gpm (132.5 lpm)
42.0 gpm (159.0 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*