The Kioti LK3054 is a 4WD compact utility tractor manufactured by Kioti (a part of Daedong) in Daegu, South Korea from 1993 to 2003. The Kioti LK3054 is equipped with a 1.4 L (85.1 cu·in) three-cylinder diesel engine and a mechanical shuttle transmission with 8 forward and 8 reverse gears.
The Kioti LK3054 compact utility tractor used the Daedong TD1400 engine. It is a 1.4 L, 1,394 cm2, (85.1 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 30.9 PS (22.7 kW; 30.4 HP) at 2,600 rpm of output power.
The Kioti LK3054 is equipped with power steering, wet disc brakes, two-post foldable ROPS, and 28.4 liters (7.5 US gal.; 6.2 Imp. gal) fuel tank.
Kioti LK3054 Specifications
General Specifications | |
Model | Kioti LK3054 |
Length | 2,820 mm (111 in) |
Width | 1,310 mm (51.6 in) |
Height (steering wheel) | 2,030 mm (79.9 in) |
Wheel base | 1,640 mm (64.6 in) |
Ground clearance | 270 mm (10.6 in) |
Weight | 1,350 kg (2,976 lbs) |
Fuel tank capacity | 28.4 liters (7.5 US gal.; 6.2 Imp. gal) |
Battery | 12V |
Cabin type | Two-post foldable ROPS |
Engine | |
Engine model | Daedong TD1400 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.4 L, 1,394 cm2, (85.1 cu·in) |
Bore and stroke | – |
Horsepower | 30.9 PS (22.7 kW; 30.4 HP) at 2,600 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Mechanical shuttle |
Gears | 8 forward and 8 reverse |
Speed | Forward: 20.1 kmh (12.5 mph) Reverse: 18.3 kmh (11.4 mph) |
Tires | |
Front tires | Ag: 9.5-16 Lawn/turf: 29×12.50-15 |
Rear tires | Ag: 14.9-24 Lawn/turf: 21.5×16.1 |
Three-Point Hitch | |
Category | I |
Control type | – |
Lift capacity (at ends) | 975 kg (2,150 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | – |
Front PTO speed | 2,600 rpm |
Rear PTO type | Live with two stage clutch |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pump flow | 26.5 gpm (100.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment