The Kubota A-175 is a 4WD sub-compact utility tractor from the Aste series. This tractor was manufactured by the Kubota from 1992 to 1996. The Kubota A-175 is equipped with a 1.0 L three-cylinder diesel engine and transmission with 6 forward and 2 reverse gears.
The Kubota A-175 utility tractor used the Kubota D1005 engine. It is a 1 L, 1,001 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 17.5 PS (12.9 kW; 17.3 HP) of maximum output power.
The Kubota A-175 is equipped with an open operator station with two-post ROPS and 17.0 liters (4.5 US gal.; 3.7 Imp. gal) fuel tank.
Kubota A-175 Specifications
| General Specifications | |
| Model | Kubota A-175 |
| Length | 2,530 mm (99.6 in) |
| Width | 1,040 mm (40.9 in) |
| Height | 1,820 mm (71.7 in) |
| Wheel base | 1,350 mm (53.1 in) |
| Weight | 684 kg (1,508 lbs) |
| Fuel tank capacity | 17.0 liters (4.5 US gal.; 3.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Kubota D1005 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1 L, 1,001 cm2, (61.1 cu·in) |
| Bore and stroke | 76.0 mm X 73.6 mm (2.99 in X 2.9 in) |
| Horsepower | 17.5 PS (12.9 kW; 17.3 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | – |
| Brakes | – |
| Transmission model | |
| Transmission type | – |
| Gears | 6 forward and 2 reverse |
| Speed | Forward: 12.9 kmh (8 mph) Reverse: 6.0 (3.7 mph) |
| Tires | |
| Front tires | Ag: 6-12 |
| Rear tires | Ag: 8-18 |
| Three-Point Hitch | |
| Caterogy | 0 |
| Control type | – |
| Lift capacity | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO spped | 540 rpm |
Be the first to comment