The Kubota B21 is a 4WD backhoe loader tractor from the B series. This tractor was manufactured by the Kubota from 2001 to 2007. The Kubota B21 is equipped with 1.0 L three-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Kubota B21 backhoe loader tractor used the Kubota D1005 engine. It is a 1.0 L, 1,001 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 21.4 PS (15.7 kW; 21.0 HP) at 2,600 rpm of maximum output power.
The Kubota B21 is equipped with hydrostatic power steering, wet disc type brakes, four-post ROPS/FOPS and 23.0 liters (6.1 US gal.; 5.1 Imp. gal) fuel tank.
Following attachments are available for the Kubota B21 backhoe loader tractor:
- Kubota loader
- Kubota backhoe
Kubota B21 Specifications
General Specifications | |
Model | Kubota B21 |
Length | – |
Width | – |
Height | – |
Wheel base | 1,530 mm (60.2 in) |
Weight | 1,810 kg (3,990 lbs) |
Fuel tank capacity | 23.0 liters (6.1 US gal.; 5.1 Imp. gal) |
Battery | 12V |
Cabin type | Four-post ROPS/FOPS |
Engine | |
Engine model | Kubota D1005 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.0 L, 1001 cm2, (61.1 cu·in) |
Bore and stroke | 76.0 mm X 73.6 mm (2.99 in X 2.9 in) |
Horsepower | 21.4 PS (15.7 kW; 21.0 HP) at 2,600 rpm |
Starter | Electric |
Oil capacity: | 3.0 L (3.2 US. qt, 2.6 Imp. qt.) |
Coolant capacity: | 3.4 L (3.6 US. qt, 3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc type |
Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (3-range) forward and reverse |
Speed | Forward: 17.9 kmh (11.1 mph) Reverse: 17.9 (11.1 mph) |
Transmission oil capacity | 27.6 L (7.3 US. gal, 6.1 Imp. gal.) |
Tires | |
Front tires | Industrial: 23×8.50-14 |
Rear tires | Industrial: 12.4-16 |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity (at ends) | 460 kg (1,014 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 27.6 L (29.16 US. qt, 24.28 Imp. qt.) |
Pump flow | 7.1 gpm (26.9 lpm) |
Steering flow | 1.3 gpm (4.9 lpm) |
Total flow | 8.4 gpm (31.8 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment