The Kubota B2100 is a 2WD or 4WD compact utility tractor from the B series. This tractor was manufactured by the Kubota from 1995 to 1999. The Kubota B2100 is equipped with 1.0 L three-cylinder diesel engine and one of two transmissions: gear type transmission with 6 forward and 2 reverse gears or hydrostatic transmission with infinite (2-range) forward and reverse.
The Kubota B2100 compact utility tractor used the Kubota D1005-D10 engine. It is a 1 L, 1,001 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 21.4 PS (15.7 kW; 21.0 HP) of maximum output power and 16.3 PS (12.0 KW; 16.0 HP) of PTO output power.
The Kubota B2100 is equipped with integral type power steering, wet disc type brakes, open operator station with two-post ROPS and 24.0 liters (6.3 US gal.; 5.3 Imp. gal) fuel tank.
Following attachments are available for Kubota B2100 compact utility tractor:
- Mid-mount Kubota 54 inch (1,370 mm) mower deck
- Mid-mount Kubota 60 inch (1,520 mm) mower deck
- Front-mount Kubota B2650 50 inch (1,270 mm) snow blower
- Front-mount Kubota B2660 60 inch (1,520 mm) snow blower
- Kubota LA301 loader
- Kubota B4672 backhoe
Kubota B2100 Specifications
General Specifications | |
Model | Kubota B2100 |
Length | 2,300 mm (90.6 in) |
Width | 1,077 mm (42.4 in) |
Height | 1,940 mm (76.4 in) |
Wheel base | 1,500 mm (59.1 in) |
Weight | 645 kg (1,422 lbs) |
Fuel tank capacity | 24.0 liters (6.3 US gal.; 5.3 Imp. gal) |
Battery | 12V, CCA: 390A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Kubota D1005-D10 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1 L, 1,001 cm2, (61.1 cu·in) |
Bore and stroke | 76.0 mm X 73.6 mm (2.99 in X 2.9 in) |
Horsepower | 21.4 PS (15.7 kW; 21.0 HP) |
Torque | 59.0 N·m (6 kg·m, 43.5 ft·lb) |
Starter | Electric |
Oil capacity: | 3.0 L (3.17 US. qt, 2.64 Imp. qt.) |
Coolant capacity: | 3.4 L (3.59 US. qt, 2.99 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Integral type power |
Brakes | Wet disc type |
Transmission model | – |
Transmission type | Gear type |
Gears | 6 forward and 2 reverse |
Speed | Forward: 13.2 kmh (8.2 mph) Reverse: 5.2 (3.2 mph) |
Transmission oil capacity | 11.0 L (11.62 US. qt, 9.68 Imp. qt.) |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (2-range) forward and reverse |
Speed | Forward: 12.3 kmh (7.6 mph) Reverse: 12.3 (7.6 mph) |
Transmission oil capacity | 12.0 L (12.68 US. qt, 10.56 Imp. qt.) |
Tires | |
Front tires | Ag: 5.00-10 (2WD); 6.00-12 (4WD) |
Rear tires | Ag: 8.3-16 |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity | 580 kg (1,279 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | – |
Middle PTO spped | 2,531 rpm |
Rear PTO type | – |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pump flow | 5.8 gpm (22 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment