The Kubota M105S is a 2WD or 4WD utility tractor from the M series. This tractor was manufactured by Kubota from 2005 to 2007. The Kubota M105S is equipped with a 3.8 L (230.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partial power shift transmission with 32 forward and 32 reverse gears (with creeper 48 forward and 48 reverse gears) or a partially synchronized transmission with 16 forward and 16 reverse gears.
The Kubota M105S utility tractor used the Kubota V3800-DI-TI engine. It is a 3.8 L, 3,769 cm2, (230.0 cu·in) four-cylinder turbocharged intercooled diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,600 rpm of net output power.
The Kubota M105S is equipped with hydrostatic power steering, hydraulic wet disc brakes, ROPS or Cab with heat and air-conditioning (optional) and 175.0 liters (46.2 US gal.; 38.5 Imp. gal) fuel tank.
Kubota M105S Specifications
General Specifications | |
Model | Kubota M105S |
Length | 4,110 mm (161.8 in) |
Width | 2,000 mm (78.7 in) |
Height (Cab) | 2,690 mm (105.9 in) |
Wheel base | 2,430 mm (95.7 in) |
Ground clearance | 430 mm (16.9 in) |
Weight | 2WD with ROPS: 2,860 kg (6,305 lbs) 2WD with Cab: 3,200 kg (7,055 lbs) 4WD with Cab: 3,920 kg (8,640 lbs) |
Fuel tank capacity | 175.0 liters (46.2 US gal.; 38.5 Imp. gal) |
Battery | 12V |
Cabin type | ROPS or Cab with heat and air-conditioning (optional) |
Engine | |
Engine model | Kubota V3800-DI-TI |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.8 L, 3,769 cm2, (230.0 cu·in) |
Bore and stroke | 100.0 mm X 120.0 mm (3.94 in X 4.72 in) |
Horsepower | 106.5 PS (78.3 kW; 105.0 HP) at 2,600 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Hydraulic wet disc |
Transmission model | Swing Shift Plus |
Transmission type | Partial power shift |
Gears | 32 forward and 32 reverse |
Transmission model | Swing Shift Plus with creeper |
Transmission type | Partial power shift |
Gears | 48 forward and 48 reverse |
Transmission model | Swing Shift |
Transmission type | Partially synchronized |
Gears | 16 forward and 16 reverse |
Tires | |
Front tires | Ag: 10.00-16 (2WD), 13.6-24 (4WD) |
Rear tires | Ag: 18.4-34 |
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity (at ends) | 2,100 kg (4,630 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540, 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2844 psi (196.1 bar) |
Valves | 1 to 3 |
Pump flow | 17.2 gpm (65.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment