Kubota M5400

Kubota M5400The Kubota M5400 is a 2WD or 4WD utility tractor from the M series. This tractor was manufactured by Kubota from 1995 to 1999. The Kubota M5400 is equipped with a 2.7 L diesel engine and partially synchronized with transmission dry disc clutch and 8 forward and 4 reverse gears, this tractor was also available with creeper.

The Kubota M5400 utility tractor used the Kubota F2803 engine. It is a 2.7 L, 2,746 cm2, (167.6 cu·in) natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. This engine produced 58.9 PS (43.3 kW; 58.0 HP) at 2,700 rpm of output power.

The Kubota M5400 is equipped with power steering, wet disc type brakes, open operator station with two-post ROPS and 65.0 liters (17.2 US gal.; 14.3 Imp. gal) fuel tank. The M5400 could be equipped with the Kubota LA1001 loader.

Kubota M5400 Specifications

General Specifications
ModelKubota M5400
Length3,490 mm (137.4 in)
Width1,840 mm (72.4 in)
Height2,380 mm (93.7 in)
Wheel base1,990 mm (78.3 in)
Weight1,750 kg (3,860 lbs)
Fuel tank capacity65.0 liters (17.2 US gal.; 14.3 Imp. gal)
Battery12V, CCA: 615A
Cabin typeOpen operator station with two-post ROPS
Engine
Engine modelKubota F2803
Engine typeFour-stroke, liquid-cooled, inline
Cylinders5
Fuel typeDiesel
Displacement2.7 L, 2,746 cm2, (167.6 cu·in)
Bore and stroke87.0 mm X 92.4 mm (3.43 in X 3.64 in)
Horsepower58.9 PS (43.3 kW; 58.1 HP) at 2,700 rpm
Torque174.9 N·m (17.8 kg·m, 128.9 ft·lb) at 1,600 rpm
StarterElectric
Oil capacity:8.0 L (8.5 US. qt, 7 Imp. qt.)
Coolant capacity:8.0 L (8.5 US. qt, 7 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesWet disc type
Transmission model
Transmission typePartially synchronized with dry disc clutch
Gears8 forward and 4 reverse
Speed Forward: 31.5 kmh (19.6 mph) Reverse: 10.9 (6.8 mph)
Transmission oil capacity40.0 L (10.6 US. gal, 8.8 Imp. gal.)
Tires
Front tiresAg<:/strong> 7.5-16 (2WD), 9.5-22 (4WD)
Rear tiresAg: 16.9-28
Three-Point Hitch
CaterogyII/I
Control typePosition control, draft control
Lift capacity (at ends)1,905 kg (4,200 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Valves1
Pump flow11.0 gpm (41.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.


*