The Landini Legend 120 is a 4WD farm tractor from the Legend series. This tractor was manufactured by the Landini from 2001 to 2003. The Landini Legend 120 is equipped with 6.0 L, six-cylinder diesel engine and transmission with 72 forward and reverse gears or 102 forward and 36 reverse.
The Landini Legend 120 farm tractor used the Perkins 1006-60T engine. It is a 6.0 L, 5985 cm2, (365.23 cu·in) six-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of cylinder bore and 127.0 mm (5.0 in) of piston stroke. The compression ratio rating is 17.2:1. This engine produced 118.6 PS (87.2 kW; 117 HP) at 2,200 rpm of maximum output power and 461 N·m (47 kg·m, 339.8 ft·lb) at 1,400 rpm of peak torque.
The Landini Legend 120 is equipped with hydrostatic power steering, wet disc brakes, cabin with air conditioning and 260 liters (68.7 US gal.; 57.2 Imp. gal) fuel tank.
Landini Legend 120 Specifications
General Specifications | |
Model | Landini Legend 120 |
Length | 5,120 mm (201.6 in) |
Width | – |
Height | 2,770 mm (109.1 in) |
Wheel base | 2,790 mm (109.8 in) |
Weight | 5,500 kg (12,126 lbs) |
Fuel tank capacity | 260 liters (68.7 US gal.; 57.2 Imp. gal) |
Battery | – |
Cabin type | Cabin with air conditioning |
Engine | |
Engine model | Perkins 1006-60T |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 6 L, 5,985 cm2, (365 cu·in) |
Bore and stroke | 100.0 mm X 127.0 mm (3.94 in X 5 in) |
Compression ratio | 17.2:1 |
Horsepower | 118.6 PS (87.2 kW; 117 HP) at 2,200 rpm |
Torque | 461 N·m (47 kg·m, 339.8 ft·lb) at 1,400 rpm |
Starter | Electric |
Oil type | 15W-40 |
Oil capacity: | 15.0 L (15.85 US. qt, 13.2 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | – |
Gears | 72 forward and reverse |
Transmission model | – |
Transmission type | – |
Gears | 102 forward and 36 reverse |
Tires | |
Front tires | 380/70R28 |
Rear tires | 480/70R38 |
Three-Point Hitch | |
Caterogy | III |
Control type | – |
Lift capacity | 7001 kg (15437 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | – |
Total flow | 16.4 gpm (62.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment