The Mahindra 1626 is a 4WD compact utility tractor from the 1600 series. This tractor has been manufactured by the Mahindra since 2018. The Mahindra 1626 is equipped with a 1.3 L three-cylinder diesel engine and one of two transmissions: sync shuttle type transmission with mechanical dry disc clutch or hydrostatic transmission.
The Mahindra 1626 compact utility tractor used the Mitsubishi S3L2 engine. It is a 1.3 L, 1,318 cm2, (80.4 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 92.0 mm (3.62 in) of the piston stroke. This engine produced 26.2 PS (19.3 kW; 26.0 HP) at 2,500 rpm of maximum output power. The compression ratio rating is 22.0:1.
The Mahindra 1626 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.
Following attachments are available for Mahindra 1626 compact utility tractor:
- Mid-mount Mahindra 72 in (1,820 mm) mower deck
- Mahindra 1526L loader
- Mahindra 1626B backhoe
Mahindra 1626 Specifications
General Specifications | |
Model | Mahindra 1626 |
Length | 3,080 mm (121.3 in) |
Width | 1,600 mm (63 in) |
Height | 2,070 mm (81.5 in) |
Wheel base | 1,700 mm (67.3 in) |
Weight | Shuttle: 1,105 kg (2,436 lbs) Hydro: 1,115 kg (2,459 lbs) |
Fuel tank capacity | 27.0 liters (7.1 US gal.; 5.9 Imp. gal) |
Battery | 12V, CCA 540A |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Mitsubishi S3L2 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.3 L, 1,318 cm2, (80.4 cu·in) |
Bore and stroke | 78.0 mm X 92.0 mm (3.07 in X 3.62 in) |
Compression ratio | 22.0:1 |
Horsepower | 26.2 PS (19.3 kW; 26.0 HP) at 2,500 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Sync shuttle type with mechanical dry disc clutch |
Gears | 8 forward and reverse |
Speed | Forward: 17.1 kmh (10.6 mph) Reverse: (0 mph) |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (3-range) forward and reverse |
Speed | Forward: 18.8 kmh (11.7 mph) Reverse: 9.5 (5.9 mph) |
Tires | |
Front tires | Ag: 7-16 Lawn/turf: 25×8.5-14 |
Rear tires | Ag: 11.2-24 Lawn/turf: 13.6×16 |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity | 1,200 kg (2,646 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | – |
Middle PTO spped | 2,000 rpm |
Rear PTO type | Independent or live |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2200 psi (151.7 bar) |
Pump flow | 7.5 gpm (28.4 lpm) |
Total flow | 10.7 gpm (40.5 lpm) |
Steering flow | 3.2 gpm (12.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment