The Mahindra 2310 is a 4WD compact utility tractor from the 10 series. This tractor was manufactured by the TYM for Mahindra in South Korea from 2002 to 2006. The Mahindra 2310 is equipped with 1.3 L three-cylinders diesel engine and synchomesh transmission (12 forward and reverse gears) with dry disc clutch or hydrostatic transmission (infinite (3-range) forward and reverse).
The Mahindra 2310 utility tractor used 1.3 L, 1,295 cm2, (79 cu·in) Mahindra TD1300 three-cylinders diesel engine with indirect injection. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 2,700 rpm of maximum output power.
The Mahindra 2310 is equipped with hydrostatic power steering, wet disc brakes, open operator station with ROPS.
Mahindra 2310 Specifications
General Specifications | |
Model | Mahindra 2310 |
Length | 3,270 mm (128.7 in) |
Width | 1,320 mm (52 in) |
Height | – |
Wheel base | – |
Weight | 1,389 kg (3,062 lbs) |
Fuel tank capacity | -) |
Battery | 12V 75A |
Cabin type | Open operator station with ROPS |
Engine | |
Engine model | Mahindra TD1300 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.3 L, 1,295 cm2, (79 cu·in) |
Bore and stroke | – |
Compression ratio | 21.0:1 |
Horsepower | 25.3 PS (18.6 kW; 25.0 HP) at 2,700 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Synchomesh shuttle with dry disc clutch |
Gears | 12 forward and reverse |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (3-range) forward and reverse |
Tires | |
Front tires | – |
Rear tires | – |
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity | Gear transmission: 940 kg (2,073 lbs) Hydro transmission: 948 kg (2,080 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Independent with electro-hydraulic clutch (hydro o |
Middle PTO spped | 2,000 rpm |
Rear PTO type | Independent with electro-hydraulic clutch |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pump flow | 5.9 gpm (22.3 lpm) |
Steering flow | 3.1 gpm (11.7 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment