The Massey Ferguson 275 is a two-wheel tractor, manufactured by Massey Ferguson from 1975 to 1983. The Massey Ferguson 275 tractor is equipped with four-cylinder Perkins A4.248 (4.1 L) diesel engine and two transmission options: manual type transmission with 8 forward and 2 reverse or Multi-Power transmission with 12 forward and 4 reverse (three speeds in two ranges plus two-speed power shift).
The MF 275 tractor used a four-cylinder naturally-aspirated liquid-cooled diesel engine Perkins A4.248, with 101.0 mm (3.97 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. Compression ratio rating is 16.0:1. The A4.248 engine produced 68 PS (50 kW; 67.0 HP) of output power on PTO-shaft. The engine used oil bath or dual dry element air cleaner with over-bonnet pre-cleaner and single, high capacity fuel filter.
The Massey Ferguson 275 used hydrostatic power-assisted steering, differential lock operated by foot-pedal and differential hydraulic wet discs brake or dry discs brake. The MF 275 used open operator station, a two-post rollover protection structure (ROPS) or cabin ware available as an option. The tractor could be equipped with Massey Ferguson 236 front-loader.
Massey Ferguson 275 specifications
General Specifications | |
Model | Massey Ferguson 275 |
Length | – |
Width | 1,880 mm (74 in.) | Height | Standard: 1,600 mm (63.1 in.) Row-crop: 1,700 mm (67.3 in.) Low-profile: 1,570 mm (62.1 in.) |
Wheelbase | 2,080 mm (82 in.) |
Ground clearance | – |
Weight (operating) | 2,998 kg (6,610 lb.) |
Fuel tank capacity | 70.0 l (18.5 Gal.) |
Battery | 12V 180A |
Engine | |
Engine model | Perkins A4.248 |
Number of Cylinders | 4 |
Firing order | 1-3-4-2 |
Fuel | Diesel |
Displacement | 4.06 L, 4,060 cc (248 cu.in.) |
Bore x stroke | 101 x 127 mm (3.975 x 5.0 in) |
Power output | PTO:68 PS (50 kW; 67.0 HP) |
Torque | – |
Starter type | Electric starter |
Oil type | – |
Governed Speeds | Low Idle: 725-775 rpm; High Idle: 2,185 rpm; (no load) Rated: 2,000 rpm (full load) |
Oil capacity | 6.6 L (7.0 U.S. qt) |
Coolant capacity | 11.3 L (12.0 U.S. qt) |
Injection Timing, B.T.D.C. | 24° |
Injector opening pressure | 17,235 kPa (2,500 psi) |
Valve clearance (Cold) | Intake: 0.30 mm (0.012 in.) Exhaust: 0.30 mm (0.012 in.) |
Valve clearance (Hot) | Intake: 0.25 mm (0.010 in.) Exhaust: 0.25 mm (0.010 in.) |
Tires size | |
Front tires | Standard: 6.00-16 Standard: 6.50-16 Standard: 7.5L-15 Row-crop: 6.50-16 Row-crop: 7.5L-15 Low-profile: 6.00-16 Low-profile: 6.50-16 Low-profile: 7.50-16 Low-profile: 9.5L-10 |
Rear tires | Standard: 16.9-24 Standard: 16.9-28 Standard: 16.9-30 Standard: 18.4-26 Row-crop: 13.6-38 Row-crop: 14.9-38 Row-crop: 15.5-38 Row-crop: 18.4-30 Low-profile: 14.9-24 Low-profile: 16.9-24 Low-profile: 18.4-16.1 Low-profile: 21.5L-16.1 |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering | Power assisted |
Gear transmission | |
Transmission type | Gear shift |
Gears | 8 forward and 2 reverse |
Ground speed | Forward: up to 30.7 km/h (19.1 mph) Reverse: up to 12.7 km/h (7.9 mph) |
Multi-Power transmission | |
Transmission type | Multi-Power (Three speeds in two ranges plus two-speed power shift operated by pedal) |
Gears | 12 forward and 4 reverse |
Ground speed | Forward: up to 30.6 km/h (19.0 mph) Reverse: up to 15.4 km/h (9.6 mph) |
PTO (Power take-off shaft) | |
PTO Type: | Rear, live type Rear, independent (option) |
PTO Speed: | 540 rpm |
Hydraulic lift | |
3-point linkage: | Category II |
Control system: | – |
No. of remote valves: | 0-2 |
Max lifting capacity (at link end): | 1,859 kg (4,100 lb.) |
Hydraulic system | |
Type | Open center |
Total flow | 73.8 lpm (19.5 gpm) |
Pressure | – |
Oil capacity (Transmission, Differential and Hydraulic System) | Dry brakes: 38.7 L (10.0 US. gal.) Wet brakes: 41.6 L (11.0 US. gal.) |
Rear axle planetary (Each) | 1.4 L (1.4 U.S. qt.) |
Power steering | 0.95 L (1.0 U.S. qt.) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment