Massey Ferguson 1742

Massey Ferguson 1742The Massey Ferguson 1742 is a 4WD compact utility tractor from the 1700 series. This tractor was manufactured by Massey Ferguson from 2013 to 2018. The Massey Ferguson 1742 is equipped with a 1.7 L (101.0 cu·in) three-cylinder diesel engine and one of two transmissions: a power shuttle transmission with 12 forward and 12 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The MF 1742 compact utility tractor used the Mitsubishi K38 engine. It is a 1.7 L, 1,655 cm2, (101.0 cu·in) three-cylinder turbocharged intercooled diesel engine with 86.0 mm (3.39 in) of the cylinder bore and 95.0 mm (3.74 in) of the piston stroke. This engine produced 42.2 PS (31.0 kW; 41.6 HP) at 2,500 rpm of output power.

The Massey Ferguson 1742 is equipped with power steering, wet disc brakes, two-post folding ROPS or cab (optional) and 54.9 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Massey Ferguson 1742 Specifications

General Specifications
ModelMassey Ferguson 1742
Length3,310 mm (130.3 in)
Width1,630 mm (64.2 in)
Height (cab)2,310 mm (90.9 in)
Wheel base1,800 mm (70.9 in)
Weight ROPS: 1,650 kg (3,638 lbs)
Cab: 1,845 kg (4,068 lbs)
Fuel tank capacity54.9 liters (14.5 US gal.; 12.1 Imp. gal)
Battery12V
Cabin typeTwo-post folding ROPS or Cab (optional)
Engine
Engine modelMitsubishi K38
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.7 L, 1,655 cm2, (101.0 cu·in)
Bore and stroke86.0 mm X 95.0 mm (3.39 in X 3.74 in)
Horsepower42.2 PS (31.0 kW; 41.6 HP) at 2,500 rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typePower
BrakesWet disc
Final driveBull gear
Transmission model
Transmission typePower shuttle with wet disc clutch
Gears12 forward and 12 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (3-range) forward and reverse
Tires
Front tires Ag: 12.4×24
Lawn/turf: 27×8.50-15
Rear tires Ag: 13.6×24
Lawn/turf: 41×14.00-20
Three-Point Hitch
CategoryI
Control typePosition control, draft-control (optional)
Lift capacity (at 610 mm/24 in)1,150 kg (2,535 lbs)
PTO (Power take-off shaft)
Middle PTO typeOptional
Middle PTO speed2000 rpm
Rear PTO typeIndependent with electro-hydraulic clutch
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center gear pump
Valves1 to 3
SCV flow11.6 gpm (43.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*