The Massey Ferguson 250 is a 2WD tractor manufactured by Massey Ferguson in Coventry, England from 1983 to 1986. The Massey Ferguson 250 is equipped with a 2.5 L (152.0 cu·in) three-cylinder diesel engine and a transmission with 8 forward and 2 reverse gears.
The MF 250 tractor used the Perkins AD3.152 engine. It is a 2.5 L, 2,491 cm2, (152.0 cu·in) three-cylinder natural aspirated diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 18.5:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,250 rpm of PTO output power.
The Massey Ferguson 250 is equipped with power assist steering, differential mechanical wet disc brakes, open operator station with two-post ROPS, and 48.0 liters (12.7 US gal.; 10.6 Imp. gal) fuel tank.
Massey Ferguson 250 Specifications
General Specifications | |
Model | Massey Ferguson 250 |
Length | 3,360 mm (132.3 in) |
Width | 1,870 mm (73.6 in) |
Height | – |
Wheel base | 1,890 mm (74.4 in) |
Weight | 2,080 kg (4,586 lbs) |
Fuel tank capacity | 48.0 liters (12.7 US gal.; 10.6 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Perkins AD3.152 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,491 cm2, (152.0 cu·in) |
Bore and stroke | 91.0 mm X 127.0 mm (3.58 in X 5 in) |
Compression ratio | 18.5:1 |
Horsepower | 40.5 PS (29.8 kW; 40.0 HP) at 2,250 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power assist |
Brakes | Differential mechanical wet disc |
Transmission model | – |
Transmission type | – |
Gears | 8 forward and 2 reverse |
Speed | Forward: 33.1 kmh (20.6 mph) Reverse: 13.7 (8.5 mph) |
Tires | |
Front tires | Ag: 6.50-16 |
Rear tires | Ag: 13.6-28 |
Three-Point Hitch | |
Category | I |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Live |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 1 to 3 |
Total flow | 14.0 gpm (53 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment