The Massey Ferguson 2605 is a 2WD or 4WD utility tractor from the 2600 series. This tractor was manufactured by TAFE for distributor Massey Ferguson (a part of AGCO) from 2007 to 2018. The Massey Ferguson 2605 is equipped with a 2.5 L (151.9 cu·in) three-cylinder diesel engine and the CenterShift transmission with 8 forward and 2 reverse gears.
The MF 2605 utility tractor used the Simpson S325.3 engine. It is a 2.5 L, 2,490 cm2, (152.0 cu·in) three-cylinder natural aspirated diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 18.5:1. This engine produced 38.5 PS (28.3 kW; 38.0 HP) at 2,000 rpm of output power and 147.8 N·m (15.1 kg·m, 108.9 ft·lb) at 1,400 rpm of torque.
The Massey Ferguson 2605 is equipped with power steering, mechanical dry drum brakes, an open platform with two-post folding ROPS, and 42.0 liters (11.1 US gal.; 9.2 Imp. gal) fuel tank.
Following attachments are available for the MF 2605 utility tractor:
- Massey Ferguson L200 (2WD) loader
- Massey Ferguson L210 (2WD) loader
- Massey Ferguson DL250 (4WD) loader
Massey Ferguson 2605 Specifications
General Specifications | |
Model | Massey Ferguson 2605 |
Length | 2WD: 3,270 mm (128.7 in) 4WD: 3,300 mm (129.9 in) |
Width | – |
Height (ROPS) | 2,330 mm (91.7 in) |
Wheel base | 2WD: 1,930 mm (76 in) 4WD: 1,950 mm (76.8 in) |
Ground clearance (drawbar) | 250 mm (9.8 in) |
Weight | 2WD: 1,850 kg (4,079 lbs) 4WD: 2,055 kg (4,530 lbs) |
Fuel tank capacity | 42.0 liters (11.1 US gal.; 9.2 Imp. gal) |
Battery | 12V, CCA 622A |
Cabin type | Open platform with two-post folding ROPS |
Engine | |
Engine model | Simpson S325.3 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,490 cm2, (152.0 cu·in) |
Bore and stroke | 91.0 mm X 127.0 mm (3.58 in X 5 in) |
Compression ratio | 18.5:1 |
Horsepower | 38.5 PS (28.3 kW; 38.0 HP) at 2,000 rpm |
Torque | 147.8 N·m (15.1 kg·m, 108.9 ft·lb) at 1,400 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Mechanical dry drum |
Final drive | Direct drive |
Transmission model | CenterShift |
Transmission type | – |
Gears | 8 forward and 2 reverse |
Tires | |
Front tires | Ag: 6.00-16 (2WD), 10.5/80-18 (4WD) |
Rear tires | Ag: 13.6-28 |
Three-Point Hitch | |
Category | II/I |
Control type | Position and top-link draft control |
Lift capacity (at ends) | 1,450 kg (3,195 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live with dual stage dry clutch or independent electro-hydraulic wet disc clutch |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 0 to 2 |
Pump flow | 4.2 gpm (15.9 lpm) |
Steering flow | 6.9 gpm (26.1 lpm) |
Total flow | 20.9 gpm (79.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment