The Massey Ferguson 2615 is a 2WD or 4WD utility tractor from the 2600 Series series. This tractor was manufactured by TAFE for distributor Massey Ferguson (a part of AGCO) in from 2007 to 2018. The Massey Ferguson 2615 is equipped with a 2.7 L (164.8 cu·in) three-cylinder diesel engine and one of two transmissions: the CenterShift transmission with 8 forward and 2 reverse gears or the SynchroShuttle transmission with 8 forward and reverse gears.
The MF 2615 utility tractor used the Simpson SJ327E engine. It is a 2.7 L, 2,700 cm2, (164.8 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 50.2 PS (36.9 kW; 49.5 HP) at 2,250 rpm of output power.
The Massey Ferguson 2615 is equipped with power steering, wet disc brakes, two-post foldable ROPS, and 42.0 liters (11.1 US gal.; 9.2 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 2615 utility tractor:
- Massey Ferguson L200 loader
- Massey Ferguson L210 loader
- Massey Ferguson DL250 loader
Massey Ferguson 2615 Specifications
General Specifications | |
Model | Massey Ferguson 2615 |
Length | 2WD: 3,270 mm (128.7 in) 4WD: 3,300 mm (130.0 in) |
Width | – |
Height (ROPS) | 2,330 mm (91.7 in) |
Wheel base | 2WD: 1,930 mm (76.0 in) 4WD: 1,950 mm (77.0 in) |
Weight | 2WD: 1,980 kg (4,365 lbs) 4WD: 2,185 kg (4,820 lbs) |
Fuel tank capacity | 42.0 liters (11.1 US gal.; 9.2 Imp. gal) |
Battery | 12V, 36Ah, CCA: 622A |
Cabin type | Two-post foldable ROPS |
Engine | |
Engine model | Simpson SJ327E |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.7 L, 2,700 cm2, (164.8 cu·in) |
Bore and stroke | 95.0 mm X 127.0 mm (3.74 in X 5 in) |
Horsepower | 50.2 PS (36.9 kW; 49.5 HP) at 2,250 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | CenterShift |
Transmission type | – |
Gears | 8 forward and 2 reverse |
Transmission model | SynchroShuttle |
Transmission type | – |
Gears | 8 forward and reverse |
Tires | |
Front tires | Ag: 7.5-16 (2WD), 10.5/80-18 (4WD) |
Rear tires | Ag: 13.6-28 |
Three-Point Hitch | |
Caterogy | II/I |
Control type | Position and top-link draft control |
Lift capacity (at ends) | 1,450 kg (3,195 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live or independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 0 to 2 |
Steering flow | 6.7 gpm (25.4 lpm) |
Total flow | 22.4 gpm (84.8 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment