The Massey Ferguson 271 is a 2WD utility tractor from the 200 One series. This tractor was manufactured by Massey Ferguson in from 1998 to 2000. The Massey Ferguson 271 is equipped with a 4.2 L (256.3 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
The MF 271 utility tractor used the Perkins 1004.4 engine. It is a 4.2 L, 4,200 cm2, (256.3 cu·in) four-cylinder natural aspirated diesel engine with 103.0 mm (4.06 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm of output power.
The Massey Ferguson 271 is equipped with power steering, independent hydraulic wet disc brakes, two-post folding ROPS, and 81.4 liters (21.5 US gal.; 17.9 Imp. gal) fuel tank. Ths tractor could be equipped with the Massey Ferguson 1036 loader.
Massey Ferguson 271 Specifications
General Specifications | |
Model | Massey Ferguson 271 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,290 mm (90.2 in) |
Weight (shipping) | 2,780 kg (6,129 lbs) |
Fuel tank capacity | 81.4 liters (21.5 US gal.; 17.9 Imp. gal) |
Battery | 12V |
Cabin type | Two-post folding ROPS |
Engine | |
Engine model | Perkins 1004.4 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.2 L, 4,200 cm2, (256.3 cu·in) |
Bore and stroke | 103.0 mm X 127.0 mm (4.06 in X 5 in) |
Horsepower | 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm |
Starter | Electric |
Coolant capacity: | 14.0 L (14.8 US. qt, 12.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Independent hydraulic wet disc |
Transmission model | – |
Transmission type | Sliding gear |
Gears | 8 forward and 2 reverse |
Speed | Forward: 28.3 kmh (17.6 mph) Reverse: 11.7 (7.3 mph) |
Tires | |
Front tires | Ag: 7.50-16 |
Rear tires | Ag: 16.9-30 |
Three-Point Hitch | |
Category | II |
Control type | |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Live wit two-stage clutch |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | – |
Hydraulic capacity | 42.0 L (11.1 US. gal, 9.2 Imp. gal.) |
Valves | 2 |
Pump flow | 10.3 gpm (39 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment