The Massey Ferguson 2805 is a 2WD row-crop tractor from the 2000 series. This tractor was manufactured by Massey Ferguson from 1978 to 1983. The MF 2805 is equipped with a 10.5 L (640.0 cu·in) eight-cylinder diesel engine and one of two transmissions: a three-speed power shift transmission with 24 forward and 6 reverse gears and dual cerametallic dry disc clutch or a mechanical shuttle transmission with 8 forward and 6 reverse gears and dual cerametallic dry disc clutch.
The Massey Ferguson 2805 row-crop tractor used the Perkins ATV8.640 engine. It is a 10.5 L, 10,487 cm2, (640.0 cu·in) V8 turbocharged diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 121.0 mm (4.76 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 192.7 PS (141.7 kW; 190.0 HP) at 2,500 rpm of output power.
The MF 2805 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab (standard), or platform configuration with four-post ROPS, and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank. This tractor could be equipped with the Massey Ferguson 246 loader.
Massey Ferguson 2805 Specifications
| General Specifications | |
| Model | Massey Ferguson 2805 |
| Length | 4,820 mm (189.8 in) |
| Width | 2,320 mm (91.3 in) |
| Height | – |
| Wheel base | 2,790 mm (109.8 in) |
| Ground clearance | Front axle: 640 mm (25.2 in) Drawbar: 390 mm (15.4 in) |
| Weight (operating) | 7,275 kg (16,039 lbs) |
| Fuel tank capacity | 329.3 liters (87 US gal.; 72.4 Imp. gal) |
| Battery | Two 12V |
| Cabin type | Cab (standard) or platform configuration with four-post ROPS. |
| Engine | |
| Engine model | Perkins ATV8.640 |
| Engine type | Four-stroke, liquid-cooled, V8 |
| Cylinders | 8 |
| Fuel type | Diesel |
| Displacement | 10.5 L, 10,487 cm2, (640.0 cu·in) |
| Bore and stroke | 118.0 mm X 121.0 mm (4.65 in X 4.76 in) |
| Compression ratio | 16.0:1 |
| Horsepower | 192.7 PS (141.7 kW; 190.0 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 22.7 L (24 US. qt, 20 Imp. qt.) |
| Coolant capacity: | 52.1 L (55.1 US. qt, 45.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Final drive | Planetary |
| Transmission model | Multi-Power |
| Transmission type | 3-speed power shift with dual cerametallic dry disc clutch |
| Gears | 24 forward and 6 reverse |
| Speed | Forward: 32.8 kmh (20.4 mph) Reverse: 15.8 kmh (9.8 mph) |
| Transmission oil capacity | 113.6 L (30 US. gal, 25 Imp. gal.) |
| Transmission model | – |
| Transmission type | Mechanical shuttle with dual cerametallic dry disc clutch |
| Gears | 8 forward and 6 reverse |
| Speed | Forward: 25.4 kmh (15.8 mph) Reverse: 14.3 kmh (8.9 mph) |
| Tires | |
| Front tires | Ag: 11.00-16 |
| Rear tires | Ag: 20.8-38 |
| Three-Point Hitch | |
| Category | III/II |
| Control type | Position control and lower-link draft sensing |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with hydraulic clutch |
| Rear PTO speed | 1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 2 or 3 |
| Pump flow | High-pressure: 16.5 gpm (62.5 lpm) Low-pressure: 6.4 gpm (24.2 lpm) Aux. high-pressure: 16.5 gpm (62.5 lpm) |
| Steering flow | 5.5 gpm (20.8 lpm) |
Be the first to comment