The Massey Ferguson 2925H is a 2WD garden tractor from the 2900 Series series. This tractor was manufactured by Simplicity for distributor Massey Ferguson in Port Washington, Wisconsin, USA from 1998 to 2003. The Massey Ferguson 2925H is equipped with a 0.7 L (44.3 cu·in) V-twin gasoline engine and a shaft-driven hydrostatic transmission with infinite forward and reverse (2-range) gears.
The Massey Ferguson 2925H garden tractor used the Kohler CH740 engine. It is a 0.7 L, 726 cm2, (44.3 cu·in) V-twin natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. The compression ratio rating is 9.0:1. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 3,600 rpm of output power.
The Massey Ferguson 2925H is equipped with power steering, disc brakes, an open operator station, and 22.7 liters (6 US gal.; 5 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 2925H garden tractor:
- Mid-mount Simplicity 48 in (1,210 mm) mower deck with 3-blade and hydraulic lift
- Mid-mount Simplicity 54 in (1,370 mm) mower deck with 3-blade and hydraulic lift
- Mid-mount Simplicity 60 in (1,520 mm) mower deck with 3-blade and hydraulic lift
- Front-mount Simplicity 60 in (1,520 mm) blade
- Front-mount Simplicity 47 in (1,190 mm) two-stage snowblower with hydraulic lift
- Simplicity 1692932 loader
- Kwik-Way backhoe
Massey Ferguson 2925H Specifications
General Specifications | |
Model | Massey Ferguson 2925H |
Length | 2,000 mm (78.7 in) |
Width | 1,130 mm (44.5 in) |
Height (steering wheel) | 1,290 mm (50.8 in) |
Wheel base | 1,390 mm (54.7 in) |
Ground clearance | 200 mm (7.9 in) |
Weight | 363 kg (800 lbs) |
Fuel tank capacity | 22.7 liters (6 US gal.; 5 Imp. gal) |
Battery | 12V, CCA 500A |
Cabin type | Open operator station. Hard-side weather cab or two-post ROPS (optional) |
Engine | |
Engine model | Kohler CH740 |
Engine type | Four-stroke, air-cooled, V-twin |
Cylinders | 2 |
Fuel type | Gasoline |
Displacement | 0.7 L, 726 cm2, (44.3 cu·in) |
Bore and stroke | 83.0 mm X 67.0 mm (3.27 in X 2.64 in) |
Compression ratio | 9.0:1 |
Horsepower | 25.3 PS (18.6 kW; 25.0 HP) at 3,600 rpm |
Starter | Electric |
Oil capacity: | 2.0 L (2.1 US. qt, 1.8 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Disc |
Final drive | Spur gear |
Differential lock | Mechanical rear |
Transmission model | Sundstrand 15U |
Transmission type | Shaft-driven hydrostatic |
Gears | Infinite forward and reverse (2-range) |
Speed | Forward: 12.9 kmh (8 mph) Reverse: 6.4 kmh (4 mph) |
Transmission oil capacity | 5.7 L (1.5 US. gal, 1.3 Imp. gal.) |
Tires | |
Front tires | Lawn/turf: 18×8.5-8 |
Rear tires | Lawn/turf: 26×12-12 |
Three-Point Hitch | |
Category | 0 (optional) |
Control type | – |
Lift capacity (at ends) | 204 kg (450 lbs) |
PTO (Power take-off shaft) | |
Front PTO type | Independent with electro-magnetic clutch |
Front PTO speed | – |
Rear PTO type | Independent with electric clutch (optional) |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | – |
Pressure | 950 psi (65.5 bar) |
Pump flow | 3.0 gpm (11.4 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment