Massey Ferguson 471 (2004-2006)

Massey Ferguson 471The Massey Ferguson 471 is a 2WD or 4WD utility tractor from the 400 series. This tractor was manufactured by Massey Ferguson in Brazil from 2002 to 2006. This second ganeration was manufactured from 2004 to 2006. The Massey Ferguson 471 is equipped with a 4.4 L (268.0 cu·in) four-cylinder diesel engine and one of three transmissions: a gear type transmission with 8 forward and 2 reverse gears and dry disc clutch, a synchronized shuttle transmission with 8 forward and 8 reverse gears or a partially synchronized transmission with 12 forward and 4 reverse gears.

The MF 471 utility tractor used the Perkins 1104C-44 engine. It is a 4.4 L, 4,391 cm2, (268.0 cu·in) four-cylinder natural aspirated diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 19.3:1. This engine produced 73 PS (53.7 kW; 72.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 471 is equipped with power steering, independent hydraulic wet disc brakes, flat-deck platform with two-post folding ROPS or Cab (optioanl) and 65.9 liters (17.4 US gal.; 14.5 Imp. gal) fuel tank for ROPS version or 109.8 liters (29.0 US gal, 24.2 Imp. gal) for version with cab.

Following attachments are available for the MF 471 utility tractor:

  • Massey Ferguson 1040 loader
  • Massey Ferguson 1055 loader
  • Massey Ferguson 1065 loader
  • Massey Ferguson 1070 loader

Massey Ferguson 471 Specifications

General Specifications
ModelMassey Ferguson 471
Length3,930 mm (154.7 in)
Width2,030 mm (79.9 in)
Height ROPS: 2,570 mm (101.2 in)
Cab: 2,690 mm (105.9 in)
Wheel base2,290 mm (90.2 in)
Ground clearance (drawbar)370 mm (14.6 in)
Weight (shipping) 2WD ROPS: 2,530 kg (5,578 lbs)
4WD ROPS: 2,860 kg (6,305 lbs)
2WD Cab: 2,990 kg (6,592 lbs)
4WD Cab: 3,410 kg (7,520 lbs)
Fuel tank capacity ROPS: 65.9 liters (17.4 US gal.; 14.5 Imp. gal)
Cab: 109.8 liters (29.0 US gal, 24.2 Imp. gal)
Battery12V
Cabin typeFlat-deck platform with two-post folding ROPS or Cab (optioanl)
Engine
Engine modelPerkins 1104C-44
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement4.4 L, 4,391 cm2, (268.0 cu·in)
Bore and stroke105.0 mm X 127.0 mm (4.13 in X 5 in)
Compression ratio19.3:1
Horsepower73 PS (53.7 kW; 72.0 HP) at 2,200 rpm
Torque398.7 N·m (40.7 kg·m, 293.8 ft·lb) at 1,400 rpm
StarterElectric
Oil capacity:8.9 L (9.4 US. qt, 7.8 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesIndependent hydraulic wet disc
Final drivePlanetary
Transmission model
Transmission typeGear type with dry disc clutch
Gears8 forward and 2 reverse
Speed Forward: 28.3 kmh (17.6 mph) Reverse: 11.7 kmh (7.3 mph)
Transmission model
Transmission typeSynchronized shuttle
Gears8 forward and 8 reverse
Transmission model
Transmission typePartially synchronized
Gears12 forward and 4 reverse
Tires
Front tires Ag: 9.5L-15 F2 (2WD), 11.2-24 R1 (4WD)
Rear tires Ag: 16.9-30 R1
Three-Point Hitch
CategoryII
Control typePosition control and top-link draft sensing
Lift capacity (at 610 mm/24 in)1,790 kg (3,950 lbs)
PTO (Power take-off shaft)
Rear PTO type Live with dry disc clutch
Independent with hydraulic wet disc clutch (optional)
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Valves2 or 3
Pump flow 3-point: 4.5 gpm (17.0 lpm)
Aux pump: 10.0 gpm (37.9 lpm)
SCV flow14.5 gpm (54.9 lpm)
Steering flow8.0 gpm (30.3 lpm)
Total flow22.5 gpm (85.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*