The Massey Ferguson 675 is a 2WD or 4WD utility tractor from the series. This tractor was manufactured by Massey Ferguson in from 1983 to 1986. The Massey Ferguson 675 is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears.
The Massey Ferguson 675 utility tractor used the Perkins A4.236 engine. It is a 3.9 L, 3,867 cm2, (236.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.1:1. This engine produced 71 PS (52.2 kW; 70.0 HP) at 2,000 rpm of output power.
The MF 675 is equipped with power steering, wet disc brakes, cab (standard), and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.
Massey Ferguson 675 Specifications
General Specifications | |
Model | Massey Ferguson 675 |
Length | 3,770 mm (148.4 in) |
Width | 2,070 mm (81.5 in) |
Height | – |
Wheel base | 2,290 mm (90.2 in) |
Weight | 2WD: 3,040 kg (6,700 lbs) 4WD: 3,630 kg (8,000 lbs) |
Fuel tank capacity | 75.7 liters (20 US gal.; 16.7 Imp. gal) |
Battery | – |
Cabin type | Cab (standard) |
Engine | |
Engine model | Perkins A4.236 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.9 L, 3,867 cm2, (236.0 cu·in) |
Bore and stroke | 98.0 mm X 127.0 mm (3.86 in X 5 in) |
Compression ratio | 16.1:1 |
Horsepower | 71 PS (52.2 kW; 70.0 HP) at 2,000 rpm |
Torque | 255 N·m (26 kg·m, 187.9 ft·lb) at 1,250 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Synchromesh |
Gears | 12 forward and 4 reverse |
Speed | Forward: 29.2 kmh (18.1 mph) Reverse: 14.6 (9.1 mph) |
Tires | |
Front tires | – |
Rear tires | – |
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity (at ends) | 1,795 kg (3,960 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | – |
Pump flow | 16.4 gpm (62.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment