The New Holland Boomer 50 is a 4WD compact utility tractor from the Boomer series. This tractor was manufactured by New Holland from 2011 to 2013. The New Holland Boomer 50 is equipped with a 2.5 L (153.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchronized shuttle transmission with 16 forward and 16 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.
The NH Boomer 50 compact utility tractor used the Mitsubishi S4Q2 engine. It is a 2.5 L, 2,507 cm2, (153.0 cu·in) four-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 103.0 mm (4.06 in) of the piston stroke. This engine produced 47.6 PS (35.0 kW; 47.0 HP) at 2,600 rpm of output power.
The New Holland Boomer 50 is equipped with hydrostatic power steering, differential mechanical wet disc brakes and two-post foldable ROPS.
New Holland Boomer 50 Specifications
| General Specifications | |
| Model | New Holland Boomer 50 |
| Length | 3,070 mm (120.9 in) |
| Width | 1,620 mm (63.8 in) |
| Height | – |
| Wheel base | 1,750 mm (68.9 in) |
| Weight (shipping) | 1,610 kg (3,549 lbs) |
| Fuel tank capacity | – |
| Battery | 12V |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Mitsubishi S4Q2 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.5 L, 2,507 cm2, (153.0 cu·in) |
| Bore and stroke | 88.0 mm X 103.0 mm (3.46 in X 4.06 in) |
| Horsepower | 47.6 PS (35.0 kW; 47.0 HP) at 2,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Differential mechanical wet disc |
| Differential lock | Mechanical foot-activated |
| Transmission model | – |
| Transmission type | Synchronized shuttle |
| Gears | 16 forward and 16 reverse |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Tires | |
| Front tires | Ag: – |
| Rear tires | Ag: – |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at ends) | 1,250 kg (2,756 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent (optional) |
| Middle PTO speed | 2000 rpm |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 0 to 2 |
| Pump flow | 8.2 gpm (31 lpm) |
| Steering flow | Gear: 4.1 gpm (15.5 lpm) Hydro: 5.5 gpm (20.8 lpm) |
| Total flow | Gear: 12.3 gpm (46.6 lpm) Hydro: 13.7 gpm (51.9 lpm) |
Be the first to comment