New Holland TC18

New Holland TC18The New Holland TC18 is a 2WD or 4WD compact utility tractor from the TC series. This tractor was manufactured by New Holland from 1999 to 2003. The New Holland TC18 is equipped with a 1.0 L (58.2 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 6 forward and 2 reverse gears or a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The New Holland TC18 compact utility tractor used the Shibaura S753 engine. It is a 1.0 L, 954 cm2, (58.2 cu·in) three-cylinder natural aspirated diesel engine with 75.0 mm (2.95 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. This engine produced 18.8 PS (13.8 kW; 18.5 HP) at 2,600 rpm of output power.

The New Holland TC18 is equipped with hydrostatic power steering, two-post foldable ROPS, and 20.0 liters (5.3 US gal.; 4.4 Imp. gal) fuel tank.

Following attachments are available for the New Holland TC18 compact utility tractor:

  • Mid-mount New Holland 914A 54 in (1,370 mm) mower deck
  • Mid-mount New Holland 914A 60 in (1,570 mm) mower deck
  • Front-mount New Holland 702C 60 in (1,570 mm) blade
  • Front-mount New Holland 716B 46 in (1,210 mm) snowblower
  • Front-mount New Holland 12LA loader

New Holland TC18 Specifications

General Specifications
ModelNew Holland TC18
Length2,700 mm (106.3 in)
Width1,040 mm (40.9 in)
Height2,030 mm (79.9 in)
Wheel base1,400 mm (55.1 in)
Ground clearance250 mm (9.8 in)
Weight 2WD: 615 kg (1,355 lbs)
4WD: 655 kg (1,440 lbs)
Fuel tank capacity20.0 liters (5.3 US gal.; 4.4 Imp. gal)
Battery12V
Cabin typeTwo-post foldable ROPS
Engine
Engine modelShibaura S753
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.0 L, 954 cm2, (58.2 cu·in)
Bore and stroke75.0 mm X 72.0 mm (2.95 in X 2.83 in)
Horsepower18.8 PS (13.8 kW; 18.5 HP) at 2,600 rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
Brakes
Transmission model
Transmission typeGear type
Gears6 forward and 2 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Tires
Front tiresAg: 4.00-12, 5×12 (4WD), 6×12 (4WD)
Rear tiresAg: 8.00-16, 9.5×16 (4WD)
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at 610 mm / 24 in)573 kg (1,265 lbs)
PTO (Power take-off shaft)
Middle PTO typeOptional
Middle PTO speed2,000 rpm
Rear PTO typeTransmission or live (HST)
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Valves2 (optional)
Pump flow4.0 gpm (15.1 lpm)
Steering flow2.75 gpm (10.4 lpm)
Total flow6.75 gpm (25.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*