The New Holland TL100 is a 2WD/4WD utility tractor from the TL series. This tractor was manufactured by New Holland in Jesi, Italy from 1999 to 2004. The New Holland TL100 is equipped with a 3.9 L (238.1 cu·in) four-cylinder diesel engine and one of two transmissions: transmission with 24 forward and 12 reverse gears or transmission with 20 forward and 12 reverse gears.
The New Holland TL100 utility tractor used the Iveco 8045 engine. It is a 3.9 L, 3,901 cm2, (238.1 cu·in) four-cylinder turbocharged diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 96.3 PS (70.8 kW; 95.0 HP) at 2,500 rpm of output power.
The New Holland TL100 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, two-post folding ROPS or Cab (optional) and 126.8 liters (33.5 US gal.; 27.9 Imp. gal) fuel tank.
New Holland TL100 Specifications
General Specifications | |
Model | New Holland TL100 |
Length | 2WD: 3,910 mm (153.9 in) 4WD: 4,060 mm (159.8 in) |
Width | – |
Height (cab) | 2,780 mm (109.4 in) |
Wheel base | 2WD: 2,340 mm (92.1 in) 4WD: 2,310 mm (90.9 in) |
Ground clearance (front axle) | 290 mm (11.4 in) |
Weight (shipping) | 2WD ROPS: 3,100 kg (6,835 lbs) 4WD ROPS: 3,400 kg (7,495 lbs) 2WD Cab: 3,300 kg (7,275 lbs) 4WD Cab: 3,600 kg (7,940 lbs) |
Fuel tank capacity | 126.8 liters (33.5 US gal.; 27.9 Imp. gal) |
Battery | 12V |
Cabin type | Two-post folding ROPS or Cab (optional) |
Engine | |
Engine model | Iveco 8045 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.9 L, 3,901 cm2, (238.1 cu·in) |
Bore and stroke | 104.0 mm X 115.0 mm (4.09 in X 4.53 in) |
Compression ratio | 16.5:1 |
Horsepower | 96.3 PS (70.8 kW; 95.0 HP) at 2,500 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Differential hydraulic wet disc |
Transmission model | |
Transmission type | – |
Gears | 24 forward and 12 reverse |
Speed | Forward: 29.7 kmh (18.5 mph) Reverse: 29.2 kmh (18.1 mph) |
Transmission model | |
Transmission type | – |
Gears | 20 forward and 12 reverse |
Tires | |
Front tires | Ag: 10.00-16 (2WD), 480/65R-24 (4WD) |
Rear tires | Ag: 600/65R-34 |
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity | 7,900 kg (17,420 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Valves | 2 or 3 |
Pump flow | 14.5 gpm (54.9 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment