The New Holland TT45A is a 2WD compact utility tractor from the TT-A series. This tractor was manufactured by New Holland in Dublin, Georgia, USA from 2007 to 2008. The New Holland TT45A is equipped with a 2.0 L (121.7 cu·in) four-cylinder diesel engine and a gear type transmission with 8 forward and 2 reverse gears and dry disc clutch.
The New Holland TT45A compact utility tractor used the Shibaura engine. It is a 2.0 L, 1,994 cm2, (121.7 cu·in) four-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 40.5 PS (29.8 kW; 40 HP) at 2,600 rpm of output power.
The New Holland TT45A is equipped with power steering, wet disc brakes, a platform with two-post folding ROPS, and 50.7 liters (13.4 US gal.; 11.2 Imp. gal) fuel tank. This tractor could be equipped with New Holland 610TL loader.
New Holland TT45A Specifications
| General Specifications | |
| Model | New Holland TT45A |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | – |
| Weight | 1,630 kg (3,594 lbs) |
| Fuel tank capacity | 50.7 liters (13.4 US gal.; 11.2 Imp. gal) |
| Battery | 12V, CCA 600A |
| Cabin type | Platform with two-post folding ROPS |
| Engine | |
| Engine model | Shibaura |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.0 L, 1,994 cm2, (121.7 cu·in) |
| Bore and stroke | 84.0 mm X 90.0 mm (3.31 in X 3.54 in) |
| Horsepower | 40.5 PS (29.8 kW; 40.0 HP) at 2,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Brakes | Wet disc |
| Final drive | Bull gear |
| Differential lock | Mechanical rear |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 8 forward and 2 reverse |
| Tires | |
| Front tires | Ag: – |
| Rear tires | Ag: – |
| Three-Point Hitch | |
| Category | II/I |
| Control type | Position control |
| Lift capacity (at ends) | 1,155 kg (2,547 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with mechanical dry disc clutch |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2538 psi (175 bar) |
| Valves | 0 to 2 |
| Pump flow | 9.8 gpm (37.1 lpm) |
| Steering flow | 7.4 gpm (28 lpm) |
| Total flow | 17.2 gpm (65.1 lpm) |
Be the first to comment