The Oliver 1365 is a 2WD or 4WD utility tractor manufactured by Fiat for distributor Oliver (a part of White) from 1971 to 1975. The Oliver 1365 is equipped with a 3.5 L (211.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears (12 forward and 3 reverse with creeper).
The Oliver 1365 utility tractor used the Fiat engine. It is a 3.5 L, 3,458 cm2, (211.0 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 59.8 PS (44.0 kW; 59.0 HP) at 2,400 rpm of output power.
The Oliver 1365 is equipped with steering, mechanical band brakes, an open operator station, and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.
Oliver 1365 Specifications
General Specifications | |
Model | Oliver 1365 |
Length | Utility: 3,090 mm (122.0 in) Row-crop: 3,170 mm (125.0 in) 4WD: 3,220 mm (127.0 in) |
Width | Utility: 1,770 mm (69.7 in) Row-crop: 1,820 mm (71.7 in) 4WD: 1,820 mm (71.7 in) |
Height (steering wheel) | Utility: 1,530 mm (60.2 in) Row-crop: 1,710 mm (67.3 in) 4WD: 1,600 mm (63.2 in) |
Wheel base | 2,050 mm (80.7 in) |
Weight (shipping) | Utility: 2,000 kg (4,410 lbs) Row-crop: 2,065 kg (4,550 lbs) 4WD: 2,240 kg (4,940 lbs) |
Fuel tank capacity | 54.0 liters (14.3 US gal.; 11.9 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Fiat |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.5 L, 3,458 cm2, (211.0 cu·in) |
Bore and stroke | 100.0 mm X 110.0 mm (3.94 in X 4.33 in) |
Compression ratio | 17.0:1 |
Horsepower | 59.8 PS (44.0 kW; 59.0 HP) at 2,400 rpm |
Starter | Electric |
Oil capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
Coolant capacity: | 13.2 L (13.9 US. qt, 11.6 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | |
Brakes | Mechanical band |
Final drive | Planetary |
Transmission model | – |
Transmission type | Sliding gear |
Gears | 8 forward and 2 reverse |
Transmission oil capacity | 18.0 L (4.8 US. gal, 4 Imp. gal.) |
Tires | |
Front tires | Ag: 7.50-16 (2WD), 9.5-24 (4WD) |
Rear tires | Ag: 16.9-30 |
Three-Point Hitch | |
Category | II/I |
Control type | Position and draft control |
Lift capacity (at ends) | 1400 kg (3087 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pressure | 2133 psi (147.1 bar) |
Pump flow | 5.76 gpm (21.8 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment