The Valtra M120 Eco is a 4WD utility tractor from the M series. This tractor was manufactured by the Valtra from 2003 to 2006. The Valtra M120 Eco is equipped with 4.4 L four-cylinder diesel engine and Powershift transmission with 36 forward and 36 reverse gears.
The Valtra M120 Eco farm tractor used the Sisu 44EWA engine. It is a 4.4 L, 4,399 cm2, (268.44 cu·in) four-cylinder turbocharged, intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 116.7 PS (85.8 kW; 115 HP) at 1,800 rpm of maximum output power and 580 N·m (59.1 kg·m, 427.5 ft·lb) at 1,200 rpm of peak torque.
The Valtra M120 Eco is equipped with hydrostatic power steering, wet disc brakes, cabin with heat and air conditioning and 165.0 liters (43.6 US gal.; 36.3 Imp. gal) fuel tank.
Valtra M120 Eco Specifications
General Specifications | |
Model | Valtra M120 Eco |
Length | 4,890 mm (192.5 in) |
Width | 2,338 mm (92 in) |
Height | 2,960 mm (116.5 in) |
Wheel base | 2,560 mm (100.8 in) |
Weight | 5,130 kg (11,310 lbs) |
Fuel tank capacity | 165.0 liters (43.6 US gal.; 36.3 Imp. gal) |
Battery | 12V |
Cabin type | Cabin with heat and air conditioning |
Engine | |
Engine model | Sisu 44EWA |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.4 L, 4,399 cm2, (268 cu·in) |
Bore and stroke | 108.0 mm X 120.0 mm (4.25 in X 4.72 in) |
Horsepower | 116.7 PS (85.8 kW; 115 HP) at 1,800 rpm |
Torque | 580 N·m (59.1 kg·m, 427.5 ft·lb) at 1,200 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Powershift |
Gears | 36 forward and 36 reverse |
Tires | |
Front tires | Ag: 14.9R28 |
Rear tires | Ag: 18.4R38 |
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity | 7200 kg (15876 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | – |
Pump flow | 21.7 gpm (82.0 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment