The Valtra M150 is a 4WD utility tractor from the M series. This tractor was manufactured by the Valtra from 2003 to 2006. The Valtra M150 is equipped with 4.4 L four-cylinder diesel engine and semi-powershift transmission with 36 forward and 36 reverse gears.
The Valtra M150 utility tractor used the Sisu 44EWA engine. It is a 4.4 L, 4,399 cm2, (268 cu·in) four-cylinder turbocharged, intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 152 PS (111.8 kW; 150 HP) at 2,200 rpm of maximum output power and 580 N·m (59.1 kg·m, 427.5 ft·lb) at 1,400 rpm of peak torque.
The Valtra M150 is equipped with hydrostatic power steering, wet disc brakes, cabin with heat and air conditioning and 165.0 liters (43.6 US gal.; 36.3 Imp. gal) fuel tank.
Valtra M150 Specifications
General Specifications | |
Model | Valtra M150 |
Length | 4,890 mm (192.5 in) |
Width | 2,338 mm (92 in) |
Height | 2,960 mm (116.5 in) |
Wheel base | 2,560 mm (100.8 in) |
Weight | 5,450 kg (12,015 lbs) |
Fuel tank capacity | 165.0 liters (43.6 US gal.; 36.3 Imp. gal) |
Battery | 12V |
Cabin type | Cabin with heat and air conditioning |
Engine | |
Engine model | Sisu 44EWA |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 4.4 L, 4,399 cm2, (268 cu·in) |
Bore and stroke | 108.0 mm X 120.0 mm (4.25 in X 4.72 in) |
Horsepower | 152 PS (111.8 kW; 149.9 HP) at 2,200 rpm |
Torque | 580 N·m (59.1 kg·m, 427.5 ft·lb) at 1,400 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Powershift |
Gears | 36 forward and 36 reverse |
Tires | |
Front tires | Ag: 14.9R28 |
Rear tires | Ag: 18.4R38 |
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity | 7200 kg (15876 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | – |
Pump flow | 24.1 gpm (91.0 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment