Zetor 5211

Zetor 5211The Zetor 5211 is a 2WD utility tractor manufactured by Zetor in Brno, Czechoslovakia from 1985 to 1992. The Zetor 5211 is equipped with a 2.7 L (164.5 cu·in) three-cylinder diesel engine and a synchromesh transmission with 10 forward and 2 reverse gears.

The Zetor 5211 utility tractor used the Zetor 5201 engine. It is a 2.7 L, 2,696 cm2, (164.5 cu·in) three-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 13.9 PS (10.2 kW; 13.7 HP) at 2,200 rpm of output power.

The Zetor 5211 is equipped with power assist steering, open operator station, and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Zetor 5211 Specifications

General Specifications
ModelZetor 5211
Length3,665 mm (144.3 in)
Width1,800 mm (70.9 in)
Height2,560 mm (100.8 in)
Wheel base2,123 mm (83.6 in)
Weight2,720 kg (5,997 lbs)
Fuel tank capacity55.0 liters (14.5 US gal.; 12.1 Imp. gal)
Battery
Cabin typeOpen operator station
Engine
Engine modelZetor 5201
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement2.7 L, 2,696 cm2, (164.5 cu·in)
Bore and stroke102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Horsepower13.9 PS (10.2 kW; 13.7 HP) at 2,200 rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD
Steering typePower assist
Brakes
Transmission typeSynchromesh
Gears10 forward and 2 reverse
Speed Forward: 24.0 kmh (14.9 mph) Reverse: 9.3 (5.8 mph)
Tires
Front tiresAg: 6.50-16, 7.50-16
Rear tiresAg: 13-28, 11-36, 14-28, 11-32
Three-Point Hitch
CaterogyII/I
Control type
Lift capacity (at ends)1,750 kg (3,860 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2320 psi (160 bar)
Valves2
Pump flow8.0 gpm (30.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*