Zetor 6340

Zetor 6340The Zetor 6340 is a 4WD utility tractor manufactured by Zetor in Brno, Czechoslovakia from 1993 to 1997. The Zetor 6340 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchromesh hydraulic transmission with 10 forward and 2 reverse gears or a mechanical shuttle transmission with 10 forward and 10 reverse gears.

The Zetor 6340 utility tractor used the Zetor Z7701 engine. It is a 3.9 L, 3,917 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 66.9 PS (49.2 kW; 66.0 HP) at 2,200 rpm of output power.

The Zetor 6340 is equipped with power steering, hydraulic dry disc brakes, two-post ROPS or cab with air-conditioning (optional), and 70.0 liters (18.5 US gal.; 15.4 Imp. gal) fuel tank.

Zetor 6340 Specifications

General Specifications
ModelZetor 6340
Length3,650 mm (143.7 in)
Width1,850 mm (72.8 in)
Height (cab)2,660 mm (104.7 in)
Wheel base2,230 mm (87.8 in)
Ground clearance530 mm (20.9 in)
Weight3,585 kg (7,904 lbs)
Fuel tank capacity70.0 liters (18.5 US gal.; 15.4 Imp. gal)
Battery12V, CCA 950A
Cabin typeTwo-post ROPS or Cab with air-conditioning (optional)
Engine
Engine modelZetor Z7701
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.9 L, 3,917 cm2, (239.0 cu·in)
Bore and stroke102.0 mm X 120.0 mm (4.02 in X 4.72 in)
Compression ratio17.0:1
Horsepower66.9 PS (49.2 kW; 66.0 HP) at 2,200 rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typePower
BrakesHydraulic dry disc
Transmission model
Transmission typeSynchromesh hydraulic cerametallic disc clutch
Gears10 forward and 2 reverse
Speed Forward: 23.8 kmh (14.8 mph) Reverse: 7.0 kmh (4.4 mph)
Transmission model
Transmission typeMechanical shuttle
Gears10 forward and 10 reverse
Speed Forward: 23.8 kmh (14.8 mph) Reverse: 26.2 kmh (16.3 mph)
Tires
Front tires Ag: 12.4-24
Rear tires Ag: 16.9-34
Three-Point Hitch
CategoryII/I
Control typePosition and draft control
Lift capacity2,653 kg (5,850 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2600 psi (179.3 bar)
Valves1 to 3
Pump flow11.0 gpm (41.6 lpm)
Steering flow4.0 gpm (15.1 lpm)
Total flow15.0 gpm (56.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*