The Zetor 6718 is a 2WD row-crop tractor from the UR1 7 series. This tractor was manufactured by Zetor in Brno, Czechoslovakia from 1972 to 1978. The Zetor 6718 is equipped with a 3.5 L (210.9 cu·in) four-cylinder diesel engine and one of two transmissions: transmission with 10 forward and 2 reverse gears or a partial power shift transmission with 20 forward and 4 reverse gears.
The Zetor 6718 row-crop tractor used the Zetor Z6701 engine. It is a 3.5 L, 3,456 cm2, (210.9 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm of output power.
The Zetor 6718 is equipped with power steering, differential hydraulic drum brakes, cab (standard) and 70.0 liters (18.5 US gal.; 15.4 Imp. gal) fuel tank.
Zetor 6718 Specifications
General Specifications | |
Model | Zetor 6718 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,240 mm (88.2 in) |
Weight | 2,835 kg (6,250 lbs) |
Fuel tank capacity | 70.0 liters (18.5 US gal.; 15.4 Imp. gal) |
Battery | – |
Cabin type | Cab (standard) |
Engine | |
Engine model | Zetor Z6701 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.5 L, 3,456 cm2, (210.9 cu·in) |
Bore and stroke | 100.0 mm X 110.0 mm (3.94 in X 4.33 in) |
Horsepower | 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Differential hydraulic drum |
Transmission model | – |
Transmission type | – |
Gears | 10 forward and 2 reverse |
Speed | Forward: 25.6 kmh (15.9 mph) Reverse: 6.3 kmh (3.9 mph) |
Transmission model | – |
Transmission type | Partial power shift |
Gears | 20 forward and 4 reverse |
Tires | |
Front tires | Ag: 7.50-16 |
Rear tires | Ag: 12.4-36 |
Three-Point Hitch | |
Category | – |
Control type | – |
Lift capacity | 1,750 kg (3,860 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 or 1000 (optional) |
Hydraulic system | |
Hydraulic type | Zetormatic |
Pressure | 2321 psi (160 bar) |
Valves | 1 |
Pump flow | 5.3 gpm (20.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment